Waterproof System Flow Rate Restrictor; Water Diverter; Figure 050-2: Flow Rate Restrictor - Miele G 1 Series Technical Information
Hide thumbs
Also See for G 1 Series:
- Operating instructions manual (76 pages) ,
- Manual (46 pages) ,
- Operating instructions manual (76 pages)
Table of Contents
Advertisement
Technical Information
2.3
WaterProof System Flow Rate Restrictor
Figure 050-2: Flow Rate Restrictor
1 Rubber seal
2 Filter
3 Restrictor
2.4
Water Diverter
Water is taken into the appliance via the inlet valve and the water diverter,
through the ion exchanger water softener into the sump. The water softener
resin container is at the bottom of the water diverter. The inlet valve is a
double solenoid valve and forms part of the WaterProof System. The water
diverter includes a number of safety features (in accordance with German
water supply laws), valves and sensors. The EGS valve (for the electronically
controlled water softener) and a reactivation valve for the water softener are
also located here, as is the flow meter. See Figure 050-3.
80
G 1xxx/G 2xxx
Advertisement
Table of Contents
Need help?
Do you have a question about the G 1 Series and is the answer not in the manual?
Questions and answers
INTAKE AND DRIAN COMES ON ALL THE TIME NEED TO READ WHAT THE CODES ARE FOR THIS UNIT G2141
For the Miele G 1 Series dishwasher model G2141, when the "Intake/Drain" light is on continuously, it typically indicates a fault condition. Based on the context, error codes like F01 or other FXX codes may be shown on the display, and the "Intake/Drain" LED may flash or stay on. Specific error codes are not directly listed for G2141 alone, but models like G2120 and G214x share similar fault indications:
- The “Intake/Drain” LED may flash.
- The time display may show FXX (e.g., F01).
- LEDs like “Wash/Rinse,” “Drying,” and “End” may flash together.
These symptoms generally suggest a fault related to water intake or drainage, such as a blocked filter, kinked hose, or faulty pump.
This answer is automatically generated