Optima, Optima Ii; Table C-3: Us Data Sheet, Optima/Optima Ii Models - Miele G 1 Series Technical Information
Hide thumbs
Also See for G 1 Series:
- Operating instructions manual (76 pages) ,
- Manual (46 pages) ,
- Operating instructions manual (64 pages)
Table of Contents
Advertisement
Technical Information
1.3
Optima, Optima II
Features
Width
Height
Free-standing
Built-in
Sensor technology
Sensor softener
Spray arm sensing
SensorDry
Noise level
Heater rating
Circulation pump
type
Electrical connection
Water (flow) pressure
Hot-water connection
Drain pump head
height
Drain hose length
Salt container in door
Drying system
Comfort door closing
aid
Power cord length
Capacity
Table C-3: US Data Sheet, Optima/Optima II Models
G 1202
G 1262
G 147x
18"
31.7" (adj. + 2.6")
31.7" (adj. + 2.6")
No
G 1472
Yes
only
MPEH (without slide shutter)
120VAC; 1.5kW; 15A
Up to max. 140°F
Circulation Turbothermic drying
12 place
9 place settings
settings
16
G 1xxx/G 2xxx
Model
G 2420
G 243x
24"
N/A
33.3" (adj. + 2.6")
Autosensor
Yes
None
G 2432
No
only
46dB
1300W
4.4 - 145 psi
Max. 3'4"
Max. 13'1"
No
No
Approx. 5'6"
14 place settings
G 247x
G 2472
only
Advertisement
Table of Contents
Need help?
Do you have a question about the G 1 Series and is the answer not in the manual?
Questions and answers
INTAKE AND DRIAN COMES ON ALL THE TIME NEED TO READ WHAT THE CODES ARE FOR THIS UNIT G2141
For the Miele G 1 Series dishwasher model G2141, when the "Intake/Drain" light is on continuously, it typically indicates a fault condition. Based on the context, error codes like F01 or other FXX codes may be shown on the display, and the "Intake/Drain" LED may flash or stay on. Specific error codes are not directly listed for G2141 alone, but models like G2120 and G214x share similar fault indications:
- The “Intake/Drain” LED may flash.
- The time display may show FXX (e.g., F01).
- LEDs like “Wash/Rinse,” “Drying,” and “End” may flash together.
These symptoms generally suggest a fault related to water intake or drainage, such as a blocked filter, kinked hose, or faulty pump.
This answer is automatically generated