Figure 020-8: Door Lock Latch, Intermediate Opening Position - Miele G 1 Series Technical Information
Hide thumbs
Also See for G 1 Series:
- Operating instructions manual (76 pages) ,
- Manual (46 pages) ,
- Manual (14 pages)
Table of Contents
Advertisement
G 1xxx/G 2xxx
Intermediate position, opening:
Figure 020-8: Door Lock Latch, Intermediate Opening Position
1, 2, 3 Latch positions 1, 2, 3
4 Direction of latch movement
5 Plug 2
6 Plug 1
S4 Door switch (supply voltage 120VAC), open
S80 Door movement switch (low voltage), open
S24 Door contact switch (supply voltage 120VAC), closed
M23 Door-locking motor (DC motor); voltage applied, motor is opening door
55
Technical Information
Advertisement
Table of Contents
Need help?
Do you have a question about the G 1 Series and is the answer not in the manual?
Questions and answers
INTAKE AND DRIAN COMES ON ALL THE TIME NEED TO READ WHAT THE CODES ARE FOR THIS UNIT G2141
For the Miele G 1 Series dishwasher model G2141, when the "Intake/Drain" light is on continuously, it typically indicates a fault condition. Based on the context, error codes like F01 or other FXX codes may be shown on the display, and the "Intake/Drain" LED may flash or stay on. Specific error codes are not directly listed for G2141 alone, but models like G2120 and G214x share similar fault indications:
- The “Intake/Drain” LED may flash.
- The time display may show FXX (e.g., F01).
- LEDs like “Wash/Rinse,” “Drying,” and “End” may flash together.
These symptoms generally suggest a fault related to water intake or drainage, such as a blocked filter, kinked hose, or faulty pump.
This answer is automatically generated