G 2000 Circulation Pumps Have A New Speed Sensor Configuration - Miele G 1 Series Technical Information
Hide thumbs
Also See for G 1 Series:
- Operating instructions manual (76 pages) ,
- Manual (46 pages) ,
- Operating instructions manual (64 pages)
Table of Contents
Advertisement
Technical Information
9
G 2000 Circulation Pumps Have a New Speed Sensor
Configuration
Two G 2000 MPEW circulation pumps, part numbers 6770655 and 6770605,
have a new speed sensor configuration. The speed sensor is no longer a
renewable part, and is sealed into the pump housing. The wiring is brought
out to a Molex connector on the side of the housing. This protects the speed
sensor assembly from moisture should the bottom pan fill with water. Be sure
to refer to the parts CD to determine which of these pumps you will
need. They are not interchangeable!
See the photos:
234
G 1xxx/G 2xxx
Advertisement
Table of Contents
Need help?
Do you have a question about the G 1 Series and is the answer not in the manual?
Questions and answers
INTAKE AND DRIAN COMES ON ALL THE TIME NEED TO READ WHAT THE CODES ARE FOR THIS UNIT G2141
For the Miele G 1 Series dishwasher model G2141, when the "Intake/Drain" light is on continuously, it typically indicates a fault condition. Based on the context, error codes like F01 or other FXX codes may be shown on the display, and the "Intake/Drain" LED may flash or stay on. Specific error codes are not directly listed for G2141 alone, but models like G2120 and G214x share similar fault indications:
- The “Intake/Drain” LED may flash.
- The time display may show FXX (e.g., F01).
- LEDs like “Wash/Rinse,” “Drying,” and “End” may flash together.
These symptoms generally suggest a fault related to water intake or drainage, such as a blocked filter, kinked hose, or faulty pump.
This answer is automatically generated