Water Inlet Fault - Miele G 4263 VI Active Operating Instructions Manual

Water inlet fault

Problem
The dishwasher stops
working shortly after
the programme starts.
The warning buzzer is
sounding.
The / indicator
light flashes on and off.
The dishwasher stops
during a programme.
The warning buzzer is
sounding.
The / indicator
light is flashing.
The fault number  or
 appears in the dis-
play.
Cause and remedy
The stopcock is closed.
 Open the stopcock fully.
Before rectifying the problem:
 Switch the dishwasher off with the  button.
The water intake is restricted.
 Open the stopcock fully and start the programme
again.
 Clean the water inlet filter (see "Maintenance").
 The water pressure at the intake is lower than
50 kPa (0.5 bar).
Seek professional advice.
Problem solving guide
67