Miele G 1 Series Technical Information page 183

G 1xxx/G 2xxx
Function
Program running time
reduction
(ID nos. -984 and later)
Water quantity
normal/increased
(ID nos. -876 and later)
Soak activation/
deactivation
Pre-wash activation/
deactivation
Second interim rinse (ID
nos. -984 and later)
Extended drying time
Appliance height setting
Model setting
Programming
Press the options button
22x. The "Tab" LED
flashes 2x slowly and 2x
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Press the options button
23x. The "Tab" LED
flashes 2x slowly and 3x
rapidly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Press the options button
24x. The "Tab" LED
flashes 2x slowly and 4x
quickly intermittently.
Press Program to change
the setting.
Press the options button
25x. The "Tab" LED
flashes 2x slowly and 5x
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Press the options button
26x. The "Tab" LED
flashes 2x slowly and 6x
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Press the options button
27x. The "Tab" LED
flashes 2x slowly and 7x
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Press the options button
36x. The "Tab" LED
flashes 3x slowly and 6x
2
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Press the options button
38x. The "Tab" LED
flashes 3x slowly and 8x
2
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
183
Technical Information
Display
The display shows p and a digit
alternately. Setting options: p0 =
Standard setting; p1 = Program
running time reduction.
Temperatures are decreased and/or
hold times removed, so the program
running time is shortened.
The display shows p and a digit
alternately: p0 = Normal water
quantity (standard setting); p1 =
Increased water quantity. If p1 is
selected, approx. 16.7 fl.oz.
(500mL) more water is taken in
during each water intake cycle.
The display shows p and a digit
alternately. Options: p0 = Soak not
activated; p1 = Soak activated.
The display shows p and a digit
alternately. Setting options: p0 =
Pre-wash not activated; p1 =
Pre-wash activated.
The display shows p and a digit
alternately. Setting options: p0 =
Standard setting; p1 = With second
interim rinse.
The display shows p and a digit
alternately. Setting options: p0 =
Normal drying time; p1 = Extended
drying time (+10 mins).
The display shows p and a digit
alternately. Setting options:
p0 = Normal machine height (G
1xxx); p1 = XXL model (G 2xxx).
The display shows p and a digit
alternately. Setting depends on
model and whether a circulation
pump with slide shutter (WAW) and
sensor softener (SEH) are installed.
p3 = G14xx, G24xx (w/out WAW,
w/SEH).