Incognito Controls; Component Test; Figure 080-3: Selected Options; Figure 080-4: Incognito Main Menu - Miele G 1 Series Technical Information
Hide thumbs
Also See for G 1 Series:
- Operating instructions manual (76 pages) ,
- Manual (46 pages) ,
- Operating instructions manual (76 pages)
Table of Contents
Advertisement
G 1xxx/G 2xxx
Figure 080-3: Selected Options
10. When finished customizing the program, confirm with OK.
11. Select Start.
2.1.3
Incognito Controls
1. Make sure that the spray arms are not blocked.
2. Turn on the dishwasher by touching the I control.
3. The main menu is shown in the display. See Figure 080-4.
4. Select the desired program.
Figure 080-4: Incognito Main Menu
5. Select the desired program according to the type of load and soiling.
6. The display changes to the program menu.
7. Options can be added to the selected program. See Figure 080-5.
Figure 080-5: Selected Program Display
Note:
Information about the selected program can be displayed by touching the i
control.
8. Select the desired options; a √ will appear next to the option selected.
9. When finished customizing the program, confirm with OK.
10. Select Start.
11. Close the door.
2.2
Component Test
After selecting the service mode (Section 080-4.3) and successfully
accessing the component test program, individual electrical components can
be activated via the program selection button or the Start/Stop button,
depending on model. During this procedure, certain components can only be
activated via special mini-programs.
125
Technical Information
Advertisement
Table of Contents
Need help?
Do you have a question about the G 1 Series and is the answer not in the manual?
Questions and answers
INTAKE AND DRIAN COMES ON ALL THE TIME NEED TO READ WHAT THE CODES ARE FOR THIS UNIT G2141
For the Miele G 1 Series dishwasher model G2141, when the "Intake/Drain" light is on continuously, it typically indicates a fault condition. Based on the context, error codes like F01 or other FXX codes may be shown on the display, and the "Intake/Drain" LED may flash or stay on. Specific error codes are not directly listed for G2141 alone, but models like G2120 and G214x share similar fault indications:
- The “Intake/Drain” LED may flash.
- The time display may show FXX (e.g., F01).
- LEDs like “Wash/Rinse,” “Drying,” and “End” may flash together.
These symptoms generally suggest a fault related to water intake or drainage, such as a blocked filter, kinked hose, or faulty pump.
This answer is automatically generated