Fully Integrated Models, Salt Container In Door; Figure D-18: Fully Integrated Model With Salt Container In Door - Miele G 1 Series Technical Information
Hide thumbs
Also See for G 1 Series:
- Operating instructions manual (76 pages) ,
- Manual (46 pages) ,
- Manual (14 pages)
Table of Contents
Advertisement
Technical Information
2.4
Fully Integrated Models, Salt Container in Door
Figure D-18: Fully Integrated Model with Salt Container in Door
1 Upper spray arm (not visible)
2 Cutlery tray
3 Upper basket
4 Middle spray arm
5 Air inlet for drying (model-dependent)
6 Lower spray arm
7 Filter combination
8 Data tag
9 Optical interface
10 Rinse aid reservoir
11 Dual-compartment detergent dispenser
12 Salt container
30
G 1xxx/G 2xxx
Advertisement
Table of Contents
Need help?
Do you have a question about the G 1 Series and is the answer not in the manual?
Questions and answers
INTAKE AND DRIAN COMES ON ALL THE TIME NEED TO READ WHAT THE CODES ARE FOR THIS UNIT G2141
For the Miele G 1 Series dishwasher model G2141, when the "Intake/Drain" light is on continuously, it typically indicates a fault condition. Based on the context, error codes like F01 or other FXX codes may be shown on the display, and the "Intake/Drain" LED may flash or stay on. Specific error codes are not directly listed for G2141 alone, but models like G2120 and G214x share similar fault indications:
- The “Intake/Drain” LED may flash.
- The time display may show FXX (e.g., F01).
- LEDs like “Wash/Rinse,” “Drying,” and “End” may flash together.
These symptoms generally suggest a fault related to water intake or drainage, such as a blocked filter, kinked hose, or faulty pump.
This answer is automatically generated