Setting Filtering (Fil); Setting Standby Time (Aoff); Activating/Deactivating Switching Of Units Of Measurement (Unit) (Variant-Dependent) - Seca 787 Instructions For Use And Warranty

Setting filtering (FIL)

Setting standby time (AOFF)

Activating/deactivating switching of
units of measurement (UnIt)
(variant-dependent)
1. Select the item from the menu.
HOLd
2. Confirm your selection.
The current setting is displayed.
3. Select the desired setting:
– : A new load on the measuring station clears the display
HOLd 1
value
– : Removing the load from the measuring station clears the
HOLd 2
display value
4. Confirm your selection.
You exit the menu automatically.
Filtering reduces interference (due to patient movement, for example) when
measuring weight. You can modify the strength of filtering.
1. Select the item from the menu.
FIL
2. Confirm your selection.
The current setting is displayed.
3. Select a filtering level:
– : Low filtering
0
– : Moderate filtering
1
– : High filtering
2
4. Confirm your selection.
You exit the menu automatically.
In battery operation, the measuring station remains on standby for 30 sec-
onds (factory setting). If there is no input or no load is put on the weighing
platform during standby time, the measuring station switches off automati-
cally. Measuring results will be discarded.
You can adjust standby time as follows:
Function
Factory setting
Increment
Minimum standby time
Maximum standby time 600 seconds (10 minutes)
1. Select the item from the menu.
AOFF
2. Confirm your selection.
The time currently set is displayed (in this case: 30 seconds).
3. Select the desired time:
► To increase value: Press
► To reduce value: Press
4. Confirm your selection.
You exit the menu automatically.
With some device variants, you can switch units of measurement using the
key. You can switch the function of the key on and off.
kg/lbs
1. Select the item from the menu.
UnIt
2. Confirm your selection.
The current setting is displayed.
3. Select the desired setting:
–
On
–
OFF
Setting
30 seconds
30 seconds
30 seconds
key
Hold
key
BMI
English
Operation • 35