Setting Up The Seca Connect 103 System; Work Steps - Seca 103 Instructions For Use Manual

4. SETTING UP THE SECA CONNECT 103 SYSTEM

4.1 Work steps

Set up
seca connect 103
Install
seca connect 103
to server
Configure
seca connect 103
Prepare data for
measuring device(s):
x Location
x IP address
x Connection type
Connection
type
WiFi
Check availability
of
WIFI Network
Configure firewall
➔
➔
➔
➔
This graphic provides an overview of the steps that are needed to set up an
integrated measuring system with the
on the following pages.
Ethernet
Internal
interface module
Patch
network socket(s)
Work steps
System structure
System requirements
Installing and configuring seca connect 103
Link
measuring device
to seca connect 103
Define
device name(s)
Recommended content:
-seca modell
-location
-Inventory number
-Network type (WiFi/Ethernet)
Adjust settings
at device
Device type
External
interface module seca 452
Attach
interface module 452
to device
Make settings for device
in seca connect 103
Setting up the seca connect 103 System • 17
. Details can be found
seca connect 103
Connect EMR system
to seca connect 103
Contact your EMR vendor
for assistance
Configure nterface
of EMR system
Configure and activate
corresponding
integration module
of seca connect 103
English