Figure 3-5 Installing A Dimm - Silicon Graphics 230 User Manual

3: System Board
Installing a Memory Module
70
To install a DIMM, align it to an empty slot and press it in until the holding clips secure
the DIMM in place, as shown in Figure 3-5.
Holding
clip
Figure 3-5 Installing a DIMM
Note: The DIMM socket is slotted to ensure proper installation. If you attempt to install
a DIMM, but it does not completely fit, you may have inserted it the wrong way. Reverse
the orientation of the DIMM.
Holding
clip
007-4263-001