Table 4-7 Boot Options Parameters - Silicon Graphics 230 User Manual

4: Setup Utility
96
Table 4-7 describes the Boot Options parameters. Settings in boldface are the default
and suggested parameter settings.
Boot Options Parameters
Table 4-7
Parameter Description
Boot Sequence This parameter allows you to specify the
boot search sequence during POST.
- 1st. The system checks this drive first.
- 2nd. The system then checks this drive if
it can not boot from the 1st specified drive.
- 3rd. If the 1st and 2nd searches fail, it
boots from this drive.
BIOS will display an error message if the
drive specified is not bootable.
Primary Setting this parameter to Auto enables the
display onboard video controller. Normally, the
adapter onboard video controller is considered as
the primary display adapter. If you
installed a video card into your system,
you need to disable the onboard VGA;
otherwise, the video card will not
function. To do this, simply set this
parameter to Disabled.
Fast boot Allows the system to boot faster by
skipping some POST routines.
Option
Onboard
Disabled
Disabled
Enabled
007-4263-001