Silicon Graphics 230 User Manual page 90

3: System Board
74
Table 3-4 (continued)
Message Action
PS/2 Keyboard Error or No Check and connect the keyboard to the system unit.
Keyboard Connected
PS/2 Keyboard Interface Replace the keyboard or call for support.
Error
PS/2 Pointing Device Error Check and connect pointing device connection.
PS/2 Pointing Device Run Setup
Interface Error
Memory Error at: Call for support.
MMMM:SSSS:OOO
(W:XXXX,
R:YYYY)where:M: MB, S:
Segment, O: Offset, X/Y:
write/read pattern
Memory Resource Call for support.
Conflict(s)
Memory Size Mismatch Check the memory size based on the system specifications.
CPU Clock Mismatch Run Setup
assistance.
NVRAM Checksum Error Call for support.
Onboard Pointing Device Replace the pointing device or call for support.
Interface Error
Real Time Clock Error Run Setup
RAM Parity Error Call for support.
64K System Management Call for support.
Memory Bad
SMRAM Not Exist Call for support.
Press Esc to turn off NMI, Press ESC to disregard the NMI error. Press any other key
any key to reboot to reboot the system. If this happens repeatedly call for
support.
a. Press CTRL + ALT + ESC during power-on self-test (POST) to enter the BIOS Set-up
screen. See Chapter 4 for information on running Setup.
System Error Messages
a and check pointing device.
a . If the message reappears, ask for technical
a and set the time and date.
007-4263-001