Figure 4-12 Supervisor Password Screen - Silicon Graphics 230 User Manual

4: Setup Utility
Setting and Changing a Password
100
To set or change a password:
1. Enable the Supervisor Password parameter in the System Security menu
by pressing the left or right arrow keys. The Supervisor Password window
appears:
Figure 4-12 Supervisor Password Screen
2. Type a password in the Enter Password field. The password may consist of up to
seven characters.
3. Press the Enter key. Retype your password in the Enter Password Again field to
verify your first entry.
4. Highlight Set or Change Password and press the Enter key.
5. Press the Esc key to return to the System Security menu and then press the Esc key
again to exit Setup. The Exit Setup screen appears:
007-4263-001