Exit Setup; Figure 4-21 Exit Setup Screen; Figure 4-22 Save Settings Screen - Silicon Graphics 230 User Manual

4: Setup Utility

Exit Setup

110
Examine the system configuration values. When you are satisfied that all the values are
correct, write them down. Store the recorded values in a safe place. In the future, if the
battery loses power or the CMOS chip is damaged, you will know what values to enter
when you rerun Setup.
Press the Esc key to leave the Setup utility. The following dialog box appears:
Figure 4-21 Exit Setup Screen
Use the arrow keys to select your response. Press the Enter key.
If you made any changes to the Setup utility, the following dialog box appears:
Save Settings Screen
Figure 4-22
Use the arrow keys to select your response. Select Yes to save the changes in CMOS.
Select No to retain the old configuration values. Press the Enter key to exit.
007-4263-001