Juniper M120 Hardware Manual page 279

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Verify that the DC source power cabling is correct, that the cables are not touching or
17.
blocking access to router components, and that they do not drape where people could
trip on them.
Switch the power switch on the power supply faceplate to the on position (
18.
that the status LED on the power supply faceplate blinks, then lights steadily
approximately one minute after you switch on the power switch.
M120 DC Power Supply Description on page 72
Electrical Specifications for the M120 DC Power Supply on page 100
Maintaining the M120 Power Supplies on page 277
Chapter 28: Replacing Power System Components
). Verify
|
253