Juniper M120 Pic Manual
Juniper M120 Pic Manual

Juniper M120 Pic Manual

M120 internet router
Hide thumbs Also See for M120:

Advertisement

Quick Links

M120 Internet Router
PIC Guide
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Part Number: 530-024399-01, Revision 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M120 and is the answer not in the manual?

Questions and answers

Summary of Contents for Juniper M120

  • Page 1 M120 Internet Router PIC Guide Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Part Number: 530-024399-01, Revision 1...
  • Page 2 M120 routers support the Type 1, Type 2, and Type 3 FPCs listed in Table 2 on page 6 and the Compact FPCs (cFPCs) listed in Table 3 on page 6. Table 6 on page 9 provides a PIC/FPC compatibility matrix for the supported PICs for the M120 router.
  • Page 3 Table 1: PICs Supported by the M120 Internet Router First JUNOS PIC Family and Type Ports Support Page ATM2 IQ ATM2 DS3 IQ 8.0R2 ATM2 E3 IQ 8.0R2 ATM2 OC3/STM1 IQ 8.0R2 ATM2 OC12/STM4 IQ 8.0R2 ATM2 OC12/STM4 IQ 8.0R2 ATM2 OC48/STM16 IQ with SFP 8.0R2...
  • Page 4 M120 Internet Router PIC Guide Table 1: PICs Supported by the M120 Internet Router (continued) First JUNOS PIC Family and Type Ports Support Page 10-Gigabit Ethernet DWDM 8.0R2 Gigabit Ethernet with SFP 8.0R2 Gigabit Ethernet with SFP 8.0R2 Gigabit Ethernet with SFP 8.0R2...
  • Page 5 Table 1: PICs Supported by the M120 Internet Router (continued) First JUNOS PIC Family and Type Ports Support Page SONET/SDH OC12c/STM4 8.0R2 SONET/SDH OC12/STM4 (Multi-Rate) with SFP SONET/SDH OC12/STM4 (Multi-Rate) with SFP SONET/SDH OC48c/STM16 with SFP 8.0R2 SONET/SDH OC48 /STM16...
  • Page 6: Fpcs And Cfpcs Supported

    A cFPC is a combination of a PIC and an FPC. It contains the interface circuitry and the FPC as a single assembly. Both cFPCs provide receptacles for XFP optical transceivers. The M120 chassis provides two slots for cFPCs, and supports any combination of cFPC types.
  • Page 7 FPCs and cFPCs Supported Table 4: Optical Interface Support for 10-Gigabit Ethernet cFPC (continued) Parameter 10-GBASE-S 10-GBASE-L 10-GBASE-E 10-GBASE-Z Maximum distance 50/125 MMF cable, 9/125 SMF cable: 9/125 SMF cable: 9/125 SMF cable: 2000 Mhz-Km: 6.2 miles/10 km 24.8 miles/40 km: 49.6 miles/80 km 984 feet/300 m Distances greater than...
  • Page 8 M120 Internet Router PIC Guide Table 5: Optical Interface Support for SONET/SDH OC192/STM64 cFPC (continued) Intermediate reach Parameter Short reach (SR) 1 (IR) 2 Long Reach (LR) 2 Maximum distance SMF cable: SMF cable: SMF cable: 6.21 miles/10 km 24.8 miles/40 km;...
  • Page 9: Pic/Fpc Compatibility

    PIC/FPC Compatibility PIC/FPC Compatibility Table 6 on page 9 provides a PIC/FPC compatibility matrix for the supported PICs for the M120 router. Table 6: M120 PIC/FPC Compatibility PIC Type Number of Ports PIC Model Number FPC1 FPC2 FPC3 ATM2 IQ PICs...
  • Page 10 M120 Internet Router PIC Guide Table 6: M120 PIC/FPC Compatibility (continued) PIC Type Number of Ports PIC Model Number FPC1 FPC2 FPC3 EIA-530 PIC EIA-530 PB-2EIA530 8.0R2 – – Ethernet PICs Fast Ethernet PB-4FE-TX 8.0R2 – – Fast Ethernet PB-8FE-FX 8.0R2...
  • Page 11 PIC/FPC Compatibility Table 6: M120 PIC/FPC Compatibility (continued) PIC Type Number of Ports PIC Model Number FPC1 FPC2 FPC3 MultiServices 100 NOTE: This PIC requires the PB-MS-100-1 8.2R2 – – 710-017980 version or later of the FPC1. MultiServices 400 PB-MS-400-2 –...
  • Page 12: Adaptive Services Ii Pic

    M120 Internet Router PIC Guide Adaptive Services II PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Supports tunnel services. This feature is included with the PIC and does not require an individual license.
  • Page 13 Adaptive Services II PIC Table 7: Adaptive Services PICs Software Features Supported by the M120 Router Software Feature Adaptive Services II Adaptive Services II Layer 2 Services GRE Key – – GRE dont-fragment – – Stateful firewall with packet inspection: detects 8.0R2...
  • Page 14 M120 Internet Router PIC Guide Table 7: Adaptive Services PICs Software Features Supported by the M120 Router (continued) Encapsulations: 8.0R2 – Multilink Frame Relay (MLFR) Multilink Point-to-Point Protocol (MLPP) Adaptive Services II PIC...
  • Page 15: Adaptive Services Ii Fips Pic

    Adaptive Services II FIPS PIC Adaptive Services II FIPS PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description JUNOS-FIPS requires an Adaptive Services II FIPS PIC for external IPSec connections. See the Secure Configuration Guide for Common Criteria and JUNOS-FIPS for more information.
  • Page 16 M120 Internet Router PIC Guide Software features For a list of the software features available for services PICs, see the JUNOS Services Interfaces Configuration Guide. Depending on your JUNOS release and individual licenses, software features for this PIC can include:...
  • Page 17: Adaptive Services Ii Layer 2 Services Pic

    Adaptive Services II Layer 2 Services PIC Adaptive Services II Layer 2 Services PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Supports Layer 2 Service package only. Tunnel services are included with the PIC. Other services require an individual license.
  • Page 18 M120 Internet Router PIC Guide Table 8: Adaptive Services PICs Software Features Software Feature Adaptive Services II Adaptive Services II Layer 2 Services GRE Key – – GRE dont-fragment – – Stateful firewall with packet inspection: detects 8.0R2 – SYN attacks, ICMP and UDP floods, and...
  • Page 19 Adaptive Services II Layer 2 Services PIC Table 8: Adaptive Services PICs Software Features (continued) Encapsulations: 8.0R2 – Multilink Frame Relay (MLFR) Multilink Point-to-Point Protocol (MLPP) Adaptive Services II Layer 2 Services PIC...
  • Page 20 M120 Internet Router PIC Guide ATM2 DS3 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four DS3 ports Power requirement: 0.41 A @ 48 V (20.0 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface.
  • Page 21 ATM2 DS3 IQ PIC Software features Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping Unspecified bit rate (UBR) traffic shaping Fine-grained variable bit rate (VBR) traffic shaping Circuit cross-connect (CCC) ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically learn the IP address of the router on the far end of an ATM permanent virtual circuit (PVC) Simple Network Management Protocol (SNMP):...
  • Page 22 M120 Internet Router PIC Guide ATM2 E3 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four E3 ports Power requirement: 0.41 A @ 48 V (20 W)
  • Page 23 ATM2 E3 IQ PIC Software features Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping Unspecified bit rate (UBR) traffic shaping Fine-grained variable bit rate (VBR) traffic shaping Circuit cross-connect (CCC) ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically learn the IP address of the router on the far end of an ATM permanent virtual circuit (PVC) Simple Network Management Protocol (SNMP):...
  • Page 24: Atm2 Oc3/Stm1 Iq Pic

    M120 Internet Router PIC Guide ATM2 OC3/STM1 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Two OC3 ports Power requirement: 0.41 A @ 48 V (20 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1...
  • Page 25 ATM2 OC3/STM1 IQ PIC Software features Circuit cross-connect (CCC) for leveraging ATM access networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle cell or unassigned cell transmission OAM fault management processes alarm indication signal (AIS), remote defect indicator (RDI) cells, and loop cells Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP Local and remote loopback...
  • Page 26 M120 Internet Router PIC Guide Table 9: Optical Interface Support for ATM2 OC3 IQ PICs (continued) Parameter Intermediate Reach (IR) Multimode Standard Telcordia GR-253 Multivendor agreement Maximum distance 9.3 miles/15 km 1.2 miles/2 km Transmitter 1260 through 1360 nm 1270 through 1380 nm...
  • Page 27: Atm2 Oc12/Stm4 Iq Pics

    ATM2 OC12/STM4 IQ PICs ATM2 OC12/STM4 IQ PICs Left: 1-port ATM2 OC12/STM4 IQ PIC; Right: 2-port ATM2 OC12/STM4 IQ PIC Software release 1-port: JUNOS 8.0R2 and later (Type 1) 2-port: JUNOS 8.0R2 and later (Type 2) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Description One or two OC12 ports Power requirement:...
  • Page 28 M120 Internet Router PIC Guide Software features Circuit cross-connect for leveraging ATM access networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle cell or unassigned cell transmission OAM fault management processes alarm indication signal (AIS), remote defect indication...
  • Page 29 ATM2 OC12/STM4 IQ PICs Table 10: Optical Interface Support for ATM2 OC12/STM4 IQ PICs (continued) Parameter Intermediate Reach (IR) Transceiver Multimode Transceiver Standard Telcordia GR-253 Multivendor agreement Maximum distance 9.3 miles/15 km 546.8 yards/500 m Transmitter wavelength 1274 through 1356 nm 1270 through 1380 nm Average launch power –15 through –8 dBm...
  • Page 30: Atm2 Oc48/Stm16 Iq Pic With Sfp

    M120 Internet Router PIC Guide ATM2 OC48/STM16 IQ PIC with SFP Software release JUNOS 8.0R2 and later (Type 2) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description One OC48 port Power requirement: 0.41 A @ 48 V ( 20 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface.
  • Page 31 ATM2 OC48/STM16 IQ PIC with SFP Software features Multiprotocol Label Switching (MPLS) circuit cross-connect for leveraging ATM access networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle cell or unassigned cell transmission OAM fault management processes alarm indication signal (AIS), remote defect indicator (RDI), and loop cells Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP Local and remote loopback...
  • Page 32 M120 Internet Router PIC Guide Table 11: Optical Interface Support for ATM2 IQ OC48 PICs (continued) PIC Type Single-Mode Intermediate Reach Standard Telcordia GR-253 Maximum distance 9.3 miles/15 km Transmitter 1274 through 1356 nm wavelength Average launch power –15 through –8 dBm Receiver saturation –8 dBm...
  • Page 33: Channelized Ds3 Iq Pic

    Channelized DS3 IQ PIC Channelized DS3 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four DS3 ports Power requirement: 0.32 A @ 48 V (15.6 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface Channelization: DS3, DS0 Hardware features Data service unit (DSU) functionality...
  • Page 34 M120 Internet Router PIC Guide Software features Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB Dynamic, arbitrary channel configuration Encapsulations: High-Level Data Link Control (HDLC)
  • Page 35: Channelized E1 Iq Pic

    Channelized E1 IQ PIC Channelized E1 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Ten E1 ports Power requirement: 0.15 A @ 48 V (7.2 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. Channelization: E1, DS0 Hardware features Data service unit (DSU) functionality...
  • Page 36 M120 Internet Router PIC Guide Cables and connectors 120-ohm RJ-48C LEDs One bicolor per E1 port: Off Port not enabled Green Physical E1 link is up; individual subchannels can be down Red Physical E1 link is down Alarms, errors, and...
  • Page 37: Channelized Oc3 Iq Pic

    Channelized OC3 IQ PIC Channelized OC3 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description One OC3 port Power requirement: 0.39 A @ 48 V (8.6 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. Channelization: DS3, DS1, DS0 Optical interface support see Table 12 on page 38...
  • Page 38 M120 Internet Router PIC Guide Software features Quality of Service (QoS) per channel: weighted round-Robin (WRR), random early drop (RED), weighted random early drop (WRED) Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB Dynamic, arbitrary channel configuration...
  • Page 39 Channelized OC3 IQ PIC Table 12: Optical Interface Support for Channelized OC3 IQ PICs (continued) PIC Type Intermediate Reach (IR) Average launch power –15 through –8 dBm Receiver saturation –8 dBm Receiver sensitivity –28 dBm Channelized OC3 IQ PIC...
  • Page 40: Channelized Oc12 Iq Pic

    M120 Internet Router PIC Guide Channelized OC12 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description One OC12 port Power requirement: 0.23 A @ 48 V (10.8 W)
  • Page 41 Channelized OC12 IQ PIC Software features Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB Dynamic, arbitrary channel configuration Full bit error rate test (BERT) Encapsulations: High-Level Data Link Control (HDLC) Frame Relay...
  • Page 42 M120 Internet Router PIC Guide Table 13: Optical Interface Support for Channelized OC12 IQ PICs (continued) Parameter Intermediate Reach (IR) Standard Telcordia GR-253 Maximum distance 9.3 miles/15 km Transmitter wavelength 1274 through 1356 nm Average launch power –15 through –8 dBm Receiver saturation –8 dBm...
  • Page 43: Channelized Stm1 Iq Pic

    Channelized STM1 IQ PIC Channelized STM1 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description One STM1 port Power requirement: 0.39 A @ 48 V (18.6 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface Channelization: STM1c, fractional E1, framed and unframed DS0 Hardware features Packet buffering, Layer 2 parsing...
  • Page 44 M120 Internet Router PIC Guide Alarms, errors, and Alarm indication signal (AIS-L, AIS-P) events Bit error rate signal degrade (BERR-SD), bit error rate signal fail (BERR-SF) Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) Errored seconds (ES-S, ES-L, ES-P), far-end bit errors REI-L, REI-P (CV-LFE, CV-PFE),...
  • Page 45: Channelized T1 Iq Pic

    Channelized T1 IQ PIC Channelized T1 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Ten T1 ports Power requirement: 0.15 A @ 48 V (7.2 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. Channelization: T1, FT1, NxDS0 Channelized T1 IQ PIC...
  • Page 46 M120 Internet Router PIC Guide Hardware features Data service unit (DSU) and channel service unit (CSU) functionality Ports configurable as clear channel T1 interfaces with 1.544-Mbps connectivity Framing: Superframe (SF or D4) and Extended Superframe (ESF) Supports B8ZS (bipolar 8-zero substitution) and AMI (alternate mark inversion) line coding Local, remote, and payload loopback testing ANSI T1.403 loopback support:...
  • Page 47 Channelized T1 IQ PIC Alarms, errors, and Alarm indication signal (AIS) events Remote defect indication (RDI) Loss of frame (LOF) Loss of signal (LOS) Bipolar violation (BPV) Excessive zero (EXZ) Line code violation (LCV) Error seconds (ES) Severely errored seconds (SES) Severely errored frames (SEF) Bit error event (BEE) Instrumentation...
  • Page 48 M120 Internet Router PIC Guide DS3 PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four DS3 ports Power requirement: 0.47 A @ 48 V (22.5 W) Integrated DSU interoperability with leading DSU vendors Hardware features High-performance throughput on each port at speeds up to 44.736 Mbps, full duplex...
  • Page 49 DS3 PIC Software features DS3 functionality: C-bit framing B3ZS line encoding DS3 diagnostics and loopback control DS3 alarm and event counting and detection Per-packet counts and byte counts Local and remote loopback testing, as well as BERT testing per DS3 DS3 far-end alarm and control (FEAC) channel support Encapsulations: High-Level Data Link Control (HDLC)
  • Page 50 M120 Internet Router PIC Guide E1 PICs Left: E1 RJ-48 PIC; Right: E1 Coaxial PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Description Four E1 or coaxial ports Power requirement: 0.08 A @ 48 V (3.74 W)
  • Page 51 E1 PICs Software features Integrated support for G.703 unframed mode and G.704 framed mode with CRC; this feature is user-configurable NOTE: The G.704 implementation supports speeds slower than 2.048 Mbps; multiple channels within a single E1 interface are not supported. Configurable clock source: Internal or loop Encapsulations: High-Level Data Link Control (HDLC)
  • Page 52 M120 Internet Router PIC Guide E3 IQ PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four E3 ports Power requirement: 0.38 A @ 48 V (18 W) Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface Hardware features Clear-channel (34.368-Mbps) and subrate E3...
  • Page 53 E3 IQ PIC Software features Quality of service (QoS) per port: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) Simple Network Management Protocol (SNMP): E3 MIB, QoS MIB Input policing and output shaping Provider-side rate limiting Full data link connection identifier (DLCI) range with sparse channel numbering Per-DLCI queues with weighted deficit round-robin and strict priority Encapsulations:...
  • Page 54 M120 Internet Router PIC Guide EIA-530 PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Two EIA-530, X.21 or V.35 serial ports Power requirement: 0.07 A @ 48 V (3.4 W)
  • Page 55 EIA-530 PIC Software features Supports four queues per port Random early detection (RED) Transmitter Signal Element Timing is looped from the timing received on the Transmitted Signal Element DCE. EIA-530 ports support the ability to invert the Transmit Data Element. The EIA-530 ports support the following rates: 2.048 Mbps 2.341 Mbps...
  • Page 56: Fast Ethernet Pics

    M120 Internet Router PIC Guide Fast Ethernet PICs Left: 4-Port Fast Ethernet PIC; Right: 8-Port Fast Ethernet PIC Left: 12-Port Fast Ethernet PIC; Right: 48-Port Fast Ethernet PIC Fast Ethernet PICs...
  • Page 57 Fast Ethernet PICs VHDCI to RJ-21 Cable Software release 4-port: JUNOS 8.0R2 and later (Type 1) 8-port: JUNOS 8.0R2 and later (Type 1) 12-port: JUNOS 8.0R2 and later (Type 1) 48-port: JUNOS 8.0R2 and later (Type 2) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Description 4 100Base-TX ports 8 100Base-FX ports...
  • Page 58 M120 Internet Router PIC Guide Cables and connectors 4-port PIC: Connector: Two-pair, Category 5 unshielded twisted-pair connectivity through an RJ-45 connector Pinout: MDI noncrossover 8-port PIC: Connector: MT-RJ female FX optical interface see Table 14 on page 59 12-port PIC:...
  • Page 59 Fast Ethernet PICs 48-port PIC does not have port LEDs. To check port status on a 48-port PIC, use the show command. For more information about this command, see the JUNOS interfaces fe-fpc/pic/port Network Interfaces Configuration Guide. Table 14: Optical Interface Support for Fast Ethernet PICs Parameter FX Interface for 8-Port Optical interface...
  • Page 60: Gigabit Ethernet Pics With Sfp

    M120 Internet Router PIC Guide Gigabit Ethernet PICs with SFP Left: 1-Port Gigabit Ethernet PIC; Right: 2-Port Gigabit Ethernet PIC Left: 4-Port Gigabit Ethernet PIC; Right: 10-Port Gigabit Ethernet PIC Gigabit Ethernet PICs with SFP...
  • Page 61 Gigabit Ethernet PICs with SFP Software release 1-port: JUNOS 8.0R2 and later (Type 1) 2-port: JUNOS 8.0R2 and later (Type 2) 4-port: JUNOS 8.0R2 and later (Type 2) 10-port: JUNOS 8.0R2 and later (Type 3) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Description One, two, four, or ten Gigabit Ethernet ports Power requirement:...
  • Page 62 M120 Internet Router PIC Guide LEDs Status LED, one bicolor: Off PIC is not enabled Green PIC is operating normally Red PIC has an error or failure Port LEDs, one pair per port: Link If green, the port is online; if there is no light, the port is down Activity If flashing green, the port is receiving data;...
  • Page 63: Gigabit Ethernet Iq Pics With Sfp

    Gigabit Ethernet IQ PICs with SFP Gigabit Ethernet IQ PICs with SFP Left: 1-port Gigabit Ethernet IQ PIC; Right: 2-port Gigabit Ethernet IQ PIC Software release 1-port: JUNOS 8.0R2 and later (Type 1) 2-port: JUNOS 8.0R2 and later (Type 2) NOTE: These PICs are not supported in JUNOS Release 8.1R1.
  • Page 64 M120 Internet Router PIC Guide Cables and connectors You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions. Fiber-optic SFP transceivers: Duplex LC/PC connector (Rx and Tx)
  • Page 65 Gigabit Ethernet IQ PICs with SFP Table 16: Optical Interface Support for Gigabit Ethernet IQ PICs with SFP (continued) Parameter 1000Base-SX 1000Base-LX 1000Base-LH Average receive –17 through 0 dBm –19 through –3 dBm –20 through –3 dBm power Receiver saturation 0 dBm –3 dBm –3 dBm...
  • Page 66: Gigabit Ethernet Iq2 Pics With Sfp

    M120 Internet Router PIC Guide Gigabit Ethernet IQ2 PICs with SFP Left: 4-port Gigabit Ethernet IQ2 PIC (Type 1); Right: 8-port Gigabit Ethernet IQ2 PIC (Type 2) Gigabit Ethernet IQ2 PICs with SFP...
  • Page 67 Gigabit Ethernet IQ2 PICs with SFP Center: 8-port Gigabit Ethernet IQ2 PIC (Type 3) Software release 4-port: JUNOS 8.0R2 and later (Type 1) 8-port: JUNOS 8.0R2 and later (Type 2) 8-port: JUNOS 8.5 and later (Type 3) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Description Four or eight Gigabit Ethernet ports Power requirement:...
  • Page 68 M120 Internet Router PIC Guide Software features Intelligent handling of oversubscribed traffic for Type 1 and Type 2 PICs Optical diagnostics and related alarms Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED)
  • Page 69 Gigabit Ethernet IQ2 PICs with SFP Table 17: Optical Interface Support for Gigabit Ethernet IQ2 PICs with SFP Parameter 1000Base-SX 1000Base-LX 1000Base-LH Optical interface Multimode Single-mode Single-mode Transceiver type Standard IEEE 802.3 1998 IEEE 802.3 1998 Multivendor agreement Maximum distance 62.5/125 MMF cable: 9/125 SMF cable: 9/125 SMF cable:...
  • Page 70 M120 Internet Router PIC Guide 10-Gigabit Ethernet IQ2 PIC with XFP Software release JUNOS 8.2 and later (Type 3) Description One 10-Gigabit Ethernet port Power requirements: 1.2 A @48 V (56 W) Hardware features High-performance throughput WAN-PHY mode at 9.953 Gbps LAN-PHY mode at 10.3125 Gbps...
  • Page 71 10-Gigabit Ethernet IQ2 PIC with XFP Software features Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) Configurable WAN-PHY mode options: loopback mpls path-trace trigger Virtual Router Redundancy Protocol (VRRP) support Hierarchical shaping Fine-grained queueing and shaping per logical interface at both ingress and egress 802.1q virtual LANs (VLANs)
  • Page 72 M120 Internet Router PIC Guide Table 18: Optical Interface for 10-Gigabit Ethernet IQ2 PICs Parameter 10-GBase-S 10-GBase-L 10-GBase-E 10-GBase-Z Transceiver model XFP-10G-S XFP-10G-L-OC192-SR1 XFP-10G-E-OC192-IR2 XFP-10G-Z-OC192-LR2 number Optical interface Multimode Single-mode Single-mode Single-mode Transceiver type Standard IEEE 802.3ae 2002 IEEE 802.3ae 2002 IEEE 802.3ae 2002...
  • Page 73 10-Gigabit Ethernet PIC with XENPAK 10-Gigabit Ethernet PIC with XENPAK Software release 10-Gigabit Ethernet PIC with XENPAK: JUNOS 8.0R2 and later (Type 3) XENPAK-OTN transceivers: JUNOS 9.0R2 and later NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description One 10-Gigabit Ethernet port Power requirement: 0.55 A @ 48 V (26.6 W) Supports large Ethernet frame sizes for more efficient throughput across the intra-POP...
  • Page 74 M120 Internet Router PIC Guide Cables and connectors Duplex SC/PC connector (RX and TX) Optical interface support See Table 19 on page 74 and Table 20 on page 75 LEDs Status LED, one bicolor: Off PIC not enabled Green PIC is operating normally...
  • Page 75 10-Gigabit Ethernet PIC with XENPAK Table 19: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK (continued) Parameter Short Wavelength Long Wavelength Extra-Long Wavelength Extra-Long Serial (10GBase-SR), Serial (10GBase-LR), Serial (10GBase-ER), Wavelength Serial LAN Rate LAN Rate LAN Rate (10GBase-ZR), LAN Rate Average receive power –9.9 through –1.0 dBm...
  • Page 76 M120 Internet Router PIC Guide Table 20: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK-OTNs (continued) Optical transmitter Transmitter type: Electro-absorption Modulated Laser (EML) Modulation format: Non-retum-to-zero (NRZ) Channel-plan wavelength range: 1551.72 through 1542.94 nm Channel-plan frequency range: 193.2 through 194.3 THz...
  • Page 77 –8 to –20 –700 to +1500 In Table 22 on page 77, one Juniper index number corresponds to the factory-set frequency that corresponds to the XENPAK-OTN model number. For example, Juniper index number 32 corresponds to the factory-set frequency 193.2 THz, which corresponds to model number XENPAK-1XGE-32A-OTN.
  • Page 78 M120 Internet Router PIC Guide 10-Gigabit Ethernet DWDM PIC Software release JUNOS 8.0R2 and later (Type 3) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description One 10-Gigabit Ethernet port Power requirement: 0.55 A @ 48 V (26.6 W)
  • Page 79 10-Gigabit Ethernet DWDM PIC Software features Enhanced optical monitoring capabilities CLI configurable wavelength support Virtual Router Redundancy Protocol (VRRP) support 802.1q virtual LANs (VLANs) support 802.3ae link aggregation support RMON EtherStats Cables and connectors Duplex SC/PC connector (RX and TX) LEDs Status LED, one bicolor: Off PIC is not enabled...
  • Page 80: Multiservices Pics

    M120 Internet Router PIC Guide MultiServices PICs Left: MultiServices 100 PIC; Right: MultiServices 400 PIC Center: MultiServices 500 PIC Software release MultiServices PICs...
  • Page 81 Application LED, one bicolor: Off Service is not running. Green Service is running under acceptable load. Amber Service is overloaded. Table 24: MultiServices PICs Software Features Supported on the M120 Router Software Feature MultiServices 100 MultiServices 400 MultiServices 500 GRE Key –...
  • Page 82 M120 Internet Router PIC Guide Table 24: MultiServices PICs Software Features Supported on the M120 Router (continued) Stateful firewall with packet inspection: detects SYN 8.2R2 attacks, ICMP and UDP floods, and ping-of-death attacks Network Address Translation (NAT) for IP addresses 8.2R2...
  • Page 83: Sonet/Sdh Oc3C/Stm1 Pic

    SONET/SDH OC3c/STM1 PIC SONET/SDH OC3c/STM1 PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: Although the illustration shows a multimode PIC, a multimode PIC and a single-mode intermediate reach PIC are both supported. NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four OC3 ports Power requirement: 0.49 A @ 48 V (23.7 W)
  • Page 84 M120 Internet Router PIC Guide Cables and connectors Duplex SC/PC connector (Rx and Tx) Optical interface support See Table 25 on page 85 NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device.
  • Page 85 SONET/SDH OC3c/STM1 PIC Alarms, errors, and SONET alarms: events Alarm indication signal line (AIS-L) Alarm indication signal path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved parity (BIP) error B1 Bit interleaved parity (BIP) error B2 Bit interleaved parity (BIP) error B3 Loss of frame (LOF) Loss of pointer (LOP-P)
  • Page 86 M120 Internet Router PIC Guide Table 25: Optical Interface Support for SONET/SDH OC3c/STM1 PICs (continued) Parameter Intermediate Reach Multimode Standard Telcordia GR-253 Multivendor agreement Maximum distance SMF cable: 9.3 miles/15 km MMF cable: 1.2 miles/2 km Transmitter 1260 through 1360 nm...
  • Page 87: Sonet/Sdh Oc3/Stm1 (Multi-Rate) Pics With Sfp

    SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP Left: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 1); Right: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 2) Software release 4-port: JUNOS 8.4 and later (Type 1) 4-port: JUNOS 8.3 and later (Type 2) Description Rate-selectable using one of the following rates: 1-port OC12...
  • Page 88 M120 Internet Router PIC Guide Software features Optical diagnostics and related alarms Per-port SONET/SDH framing Link aggregation Alarm and event counting and detection Dual-router automatic protection switching (APS) Multiprotocol Label Switching (MPLS) fast reroute Encapsulations: High-Level Data Link Control (HDLC)
  • Page 89 SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP Alarms, errors, and SONET alarms: events Alarm indication signal line (AIS-L) Alarm indication signal path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved parity (BIP) error B1 Bit interleaved parity (BIP) error B2 Bit interleaved parity (BIP) error B3 Loss of frame (LOF)
  • Page 90 M120 Internet Router PIC Guide Table 26: Optical Interface Support for SONET/SDH OC3/STM1 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Parameter Multimode Intermediate Reach (IR-1) Long Reach (LR-1) Optical interface Multimode Single-mode Single-mode Transceiver type Maximum distance MMF cable: 1.2 miles/2 km SMF cable: 9.3 miles/15 km...
  • Page 91: Sonet/Sdh Oc12C/Stm4 Pic

    SONET/SDH OC12c/STM4 PIC SONET/SDH OC12c/STM4 PIC Software release JUNOS 8.0R2 and later NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description One OC12 port Power requirement: 0.23 A @ 48 V (10.8 W) Hardware features Multiplexing and demultiplexing Rate policing on input Rate shaping on output Packet buffering, Layer 2 parsing...
  • Page 92 M120 Internet Router PIC Guide LEDs One tricolor per port: Off Not enabled Green Online with no alarms or failures Amber Online with alarms for remote failures Red Active with a local alarm; router has detected a failure Alarms, errors, and...
  • Page 93 SONET/SDH OC12c/STM4 PIC Table 28: Optical Interface Support for SONET/SDH OC12c/STM4 PICs Parameter Intermediate Reach Multimode Optical interface Single-mode Multimode Transceiver type Fixed Fixed Standard Telcordia GR-253 Multivendor agreement Maximum distance SMF cable: 9.3 miles/15 km MMF cable: 546.8 yards/500 m Transmitter 1274 through 1356 nm 1270 through 1380 nm...
  • Page 94: Sonet/Sdh Oc12/Stm4 (Multi-Rate) Pics With Sfp

    M120 Internet Router PIC Guide SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP Left: 1-port SONET/SDH OC12/STM4 (Multi-Rate) PIC; Right: 4-port SONET/SDH OC12/STM4 (Multi-Rate) PIC Software release 1-port: JUNOS 8.4 and later (Type 1) 4-port: JUNOS 8.3 and later (Type 2) Description...
  • Page 95 SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP Software features Optical diagnostics and related alarms Per-port SONET/SDH framing Link aggregation Alarm and event counting and detection Dual-router automatic protection switching (APS) Multiprotocol Label Switching (MPLS) fast reroute Encapsulations: High-Level Data Link Control (HDLC) Frame Relay Circuit cross-connect (CCC) Translational cross-connect (TCC)
  • Page 96 M120 Internet Router PIC Guide Alarms, errors, and SONET alarms: events Alarm indication signal line (AIS-L) Alarm indication signal path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved parity (BIP) error B1 Bit interleaved parity (BIP) error B2...
  • Page 97 SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP Table 29: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Parameter Multimode Intermediate Reach (IR-1) Long Reach (LR-1) Optical interface Multimode Single-mode Single-mode Transceiver type Maximum distance MMF cable: 1.2 miles/2 km SMF cable: 9.3 miles/15 km SMF cable: 24.85 miles/40 km Standard...
  • Page 98 M120 Internet Router PIC Guide Table 31: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at an OC48/STM16 Rate (continued) Parameter Short Reach (SR-1) Intermediate Reach (IR-1) Long Reach (LR-2) Transceiver type Maximum distance SMF cable: 1.24 miles/2 km SMF cable: 9.3 miles/15 km...
  • Page 99: Sonet/Sdh Oc48C/Stm16 Pic With Sfp

    SONET/SDH OC48c/STM16 PIC with SFP SONET/SDH OC48c/STM16 PIC with SFP Software release JUNOS 8.0R2 and later NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four OC48 ports Power requirement: 0.86 A @ 48 V (41.4 W) Hardware features Multiplexing and demultiplexing on the 1-port PIC Rate policing on input Rate shaping on output...
  • Page 100 M120 Internet Router PIC Guide Cables and connectors You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions. Duplex LC/PC connector (Rx and Tx) Optical interface support See Table 32 on page 101 NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device.
  • Page 101 SONET/SDH OC48c/STM16 PIC with SFP Alarms, errors, and SONET alarms: events Alarm indication signal line (AIS-L) Alarm indication signal path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved parity (BIP) error B1 Bit interleaved parity (BIP) error B2 Bit interleaved parity (BIP) error B3 Loss of frame (LOF) Loss of pointer (LOP-P)
  • Page 102 M120 Internet Router PIC Guide Table 32: Optical Interface Support for SONET/SDH OC48c/STM16 PICs with SFP (continued) Parameter Short Reach (SR) Intermediate Reach (IR) Long Reach (LR) Maximum distance SMF cable: 1.24 miles/2 km SMF cable: 9.3 miles/15 km SMF cable: 49.71 miles/80 km...
  • Page 103: Sonet/Sdh Oc48/Stm16 (Multi-Rate) Pic With Sfp

    SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP Software release JUNOS 8.3 and later (Type 2) Description Rate-selectable using one of the following rates: 1-port OC3c 1-port OC12 1-port OC12c 1-port OC48 1-port OC48c Power requirement: 0.20 A @ 48 V (9.5 W) Hardware features Multiplexing and demultiplexing Rate policing on input...
  • Page 104 M120 Internet Router PIC Guide Cables and connectors You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions. Duplex LC/PC connector (Rx and Tx) Optical interface support See Table 33 on page 105, Table 34 on page 106, and...
  • Page 105 SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP Alarms, errors, and SONET alarms: events Alarm indication signal line (AIS-L) Alarm indication signal path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved parity (BIP) error B1 Bit interleaved parity (BIP) error B2 Bit interleaved parity (BIP) error B3 Loss of frame (LOF)
  • Page 106 M120 Internet Router PIC Guide Table 33: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Parameter Multimode Intermediate Reach (IR-1) Long Reach (LR-1) Optical interface Multimode Single-mode Single-mode Transceiver type Maximum distance MMF cable: 1.2 miles/2 km SMF cable: 9.3 miles/15 km...
  • Page 107 SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP Table 35: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at an OC48/STM16 Rate (continued) Parameter Short Reach (SR-1) Intermediate Reach (IR-1) Long Reach (LR-2) Transceiver type Maximum distance SMF cable: 1.24 miles/2 km SMF cable: 9.3 miles/15 km SMF cable: 49.71 miles/80 km Standard...
  • Page 108: Sonet/Sdh Oc192C/Stm64 Pic With Xfp

    M120 Internet Router PIC Guide SONET/SDH OC192c/STM64 PIC with XFP Software release JUNOS 8.3 and later (Type 3) Description One OC192 port Power requirement: 0.52A @ 48 V (25 W) Hardware features Multiplexing and demultiplexing Rate policing on input Rate shaping on output...
  • Page 109 SONET/SDH OC192c/STM64 PIC with XFP Cables and connectors Duplex LC connector (Rx and Tx) Optical interface support See Table 36 on page 110 NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device.
  • Page 110 M120 Internet Router PIC Guide Alarms, errors, and SONET alarms: events Alarm indication signal line (AIS-L) Alarm indication signal path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved parity (BIP) error B1 Bit interleaved parity (BIP) error B2...
  • Page 111 SONET/SDH OC192c/STM64 PIC with XFP Table 36: Optical Interface Support for SONET/SDH OC192 PICs (continued) Parameter Short reach (SR-1) Intermediate Reach (IR-2) Long Reach (LR-2) Transceiver type Standard Telcordia GR-253 OC192 Telcordia GR-253 OC192 Telcordia GR-253 OC192 Maximum distance SMF cable: 6.21 miles/10 SMF cable: 24.8 miles/40 SMF cable: 49.71 miles/80 km;...
  • Page 112 M120 Internet Router PIC Guide T1 PIC Software release JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Four T1 ports Power requirement: 0.08 A @ 48 V (3.7 W) Supports clear channel T1 per port (1.544 Mbps per channel) Supports attenuation up to –12 dBm...
  • Page 113 T1 PIC Alarms, errors, and Alarm indication signal (AIS) events Bipolar violations Excessive zeros Far-end block errors (FEBE, E-bit errors) Loss of frame (LOF), Loss of signal (LOS) Yellow alarm bit (X-bit) disagreements T1 PIC...
  • Page 114: Tunnel Services Pic

    M120 Internet Router PIC Guide Tunnel Services PIC Software release JUNOS 8.0R2 and later (Type 1, Type 2, and Type 3) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Description Power requirement: 0.07 A @ 48 V (3.4 W)
  • Page 115: High Availability Features

    Appendix A High Availability Features High availability features include Routing Engine redundancy, graceful Routing Engine switchover (GRES), nonstop bridging, nonstop active routing, graceful restart for routing protocols, Virtual Router Redundancy Protocol (VRRP), and unified in-service software upgrade (ISSU). Some high availability features are not supported by all platforms and all PICs.
  • Page 116 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

Table of Contents