Ac Power Electrical Safety Guidelines For The M120 Router - Juniper M120 Hardware Manual

Related
Documentation

AC Power Electrical Safety Guidelines for the M120 Router

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Advarsel Før det utføres arbeid på kabinettet eller det arbeides i nærheten
av strømforsyningsenheter, skal strømledningen trekkes ut p
vekselstrømsenheter og strømmen kobles fra ved strømbryteren på
likestrømsenheter.
Aviso Antes de trabalhar num chassis, ou antes de trabalhar perto de unidades
de fornecimento de energia, desligue o cabo de alimentação nas unidades
de corrente alternada; desligue a corrente no disjuntor nas unidades de
corrente contínua.
¡Atención! Antes de manipular el chasis de un equipo o trabajar cerca de una
fuente de alimentación, desenchufar el cable de alimentación en los equipos
de corriente alterna (CA); cortar la alimentación desde el interruptor
automático en los equipos de corriente continua (CC).
Varning! Innan du arbetar med ett chassi eller nära strömförsörjningsenheter
skall du för växelströmsenheter dra ur nätsladden och för likströmsenheter
bryta strömmen vid överspänningsskyddet.
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 344
The following electrical safety guidelines apply to AC-powered routers:
AC-powered routers are shipped with a three-wire electrical cord with a grounding-type
plug that fits only a grounding-type power outlet. Do not circumvent this safety feature.
Equipment grounding should comply with local and national electrical codes.
Each AC power supply has two AC appliance inlets. Each requires a dedicated AC
power feed. For 100-120 VAC, both inlets are used. For 200-240 VAC, only the top inlet
is used. For information about site power requirements, see
Requirements" on page
ground, see "Connecting Power to an AC-Powered M120 Router" on page 167
"Connecting the Grounding Cable to the M120 Router" on page
The power cord serves as the main disconnecting device. The socket outlet must be
near the router and be easily accessible.
The cores in the mains lead are colored in accordance with the following code:
Green and yellow—Earth
Blue—Neutral
Brown—Live
In Case of an Electrical Accident on page 339
General Electrical Safety Warnings for Juniper Networks Devices on page 339
Chapter 41: Electrical Safety Guidelines and Warnings
88. For information about connecting the router to power and
"M120 Router Power
and
151.
343