Juniper M120 Hardware Manual page 150

M120 Multiservice Edge Router Hardware Guide
Related
Documentation
124
On the rear of each rack rail, partially insert a mounting screw into the highest hole
1.
specified in Table 66 on page 121
Install the large shelf on the rack. Hang the shelf over the mounting screws using the
2.
keyhole slots located near the top of the large shelf flanges.
Partially insert screws into the open holes in the ears of the large shelf.
3.
Tighten all the screws completely.
4.
M120 Rack Mounting Requirements on page 83
M120 Site Preparation Checklist on page 81
Installation Safety Warnings for Juniper Networks Devices on page 322
for the large shelf.
Copyright © 2018, Juniper Networks, Inc.