M120 Multiservice Edge Router Hardware Guide
See Also
Related
Documentation
Replacing an M120 CB
Removing an M120 CB
202
Figure 73: Installing the DIMM Module
M120 Routing Engine Description on page 22
Replacing an M120 Routing Engine on page 195
Removing a M120 DIMM Module on page 200
M120 Routing Engine Description on page 22
Replacing an M120 Routing Engine on page 195
To replace a CB, perform the following procedures:
Removing an M120 CB on page 202
Installing an M120 CB on page 204
The router can have one or two CBs. They are located on either side of the FEBs in the
rear of the chassis in the slots marked
approximately 6.9 lb (3.1 kg).
and
. With an RE installed, each CB weighs
CB0
CB1
Copyright © 2018, Juniper Networks, Inc.