Juniper M120 Hardware Manual page 198

M120 Multiservice Edge Router Hardware Guide
Related
Documentation
172
Wait until a message appears on the console confirming that the operating system
has halted. For more information about the command, see the
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis.
Switch the circuit breaker on each DC power supply faceplate to the off position (
3.
For the AC power supply, move the power switch to the standby position.
General Electrical Safety Warnings for Juniper Networks Devices on page 339
M120 AC Power Supply Description on page 72
Powering On the M120 Router on page 170
.
CLI Explorer
Copyright © 2018, Juniper Networks, Inc.
).
O