Figure 48: M120 Routing Engine Management Ports And Alarm Relay - Juniper M120 Hardware Manual

M120 Multiservice Edge Router Hardware Guide
154
connect the router to external alarm-reporting devices through the alarm relay contacts
on the CIP. (For more information, see
After you have installed the router into the rack, attach one or more external devices to
the ports on the CIP that connect to the Routing Engines for management and service
operations (see Figure 48 on page
Routing Engine management ports, see
Specifications for the M120 Router" on page
Figure 48: M120 Routing Engine Management Ports and Alarm Relay Contacts
Connecting the M120 Router to a Management Console or Auxiliary Device on page 155
Connecting the M120 Router to a Network for Out-of-Band Management on page 156
Connecting the M120 Router to an External Alarm-Reporting Device on page 158
"M120 Craft Interface Description" on page
154). For specifications for the cable accepted by the
"Routing Engine Interface Cable and Wire
105.
Copyright © 2018, Juniper Networks, Inc.
11.)