YASKAWA HV600 Installation & Startup page 300

9.3 European Standards
A - SW (ON)
A - SW (ON)
If you lose an EMC filter switch screw, use
with the correct tightening torque.
NOTICE: Only use the screws specified in this manual. If you use screws that are not approved, it can cause damage to the drive.
Model
2011 - 2059, 4005 - 4065
2075 , 4077
300
B - Screw (OFF)
Figure 9.9 EMC Filter Switch Location 3
B - Screw (OFF)
Figure 9.10 EMC Filter Switch Location 4
Table 9.4 to find the correct replacement screw and install the new screws
Table 9.4 Screw Sizes and Tightening Torques
Screw Size
M4 × 20
M4 × 30
YASKAWA TOEPYAIH6B01A HV600 AC Drive Narrow Bypass Installation & Startup
Tightening Torque
N∙m
1.0 - 1.3
1.0 - 1.3