Advertisement
■ Wire connection
1) Correctly wire as in the connection diagram.
Reverse connection may damage the product
and degrade the performance.
2) Do not use idle terminals. Such use may damage
the sensor.
3) For cable wiring, use shield wires with possibly short
wiring lengths to prevent the influence of the noise.
■ Cleaning
Avoid ultrasonic cleaning as this may cause
disconnection of the wire.
■ Storage and transportation
1) Excessive vibrations and shocks during transport
may damage the product. Carefully handle the
exterior box and the reel.
2) Extremely bad storage conditions may deteriorate
solderability or characteristics, and defect the
appearance. Recommended conditions of the
storage place are below.
• Temperature: 0 to 45 °C
• Humidity: Below 70 % R.H.
• Atmosphere: Low-dust and free from noxious
chemicals such as sulfurous acid gas
2) The package is moisture-proof due to its
sensitivity to humidity. When storing the sensor,
follow the instructions below.
• Promptly use after opening. (within a week,
below 30 °C
86
• Once unpacked, preserving in a moisture-
p ro o f m a n n e r, s u c h a s k e e p i n g i n a
moisture-proof bag with silica gels, is
recommended for long-term storage. (use
within 3 months)
✽ During soldering, when adding thermal stress
in a moisture absorbing state, moisture
evaporates, swells and generates stress to
the internal package. To avoid swellings and
cracks in the surface of the package, follow
the soldering conditions.
■ Special notes
We exert maximum efforts for quality control of the
product, however :
1) To p r e v e n t o c c u r r e n c e o f u n e x p e c t e d
circumstances, please infor m us of the
specifications of your product, customers, use
conditions and details of the attachment position.
2) Have sufficient margin values of driving/
performance guarantee described in the
specifications and apply safety measures with
double circuits, if serious effects on human
lives or property are predicted due to a quality
failure of the product. Those countermeasures
are also for the product liability.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Infrared Array Sensor Grid-EYE (AMG88)
32 to 113 °F
°F/60 % R.H.)
3) A warranty period is one year after the delivery
to your company. Quality assurance is limited
to the items and the scopes described in the
specifications.
If a defect is found after the delivery, we will
promptly provide a replacement or change/
repair the defect part at the place of delivery
in good faith. Exceptions are below.
• Damages by a failure or a defect which
arose after the delivery.
• A f t e r t h e d e l i v e r y, w h e n s t o r i n g a n d
t r a n s p o r t i n g , i f c o n d i t i o n s o t h e r t h a n
conditions in the specifications are applied to
the product.
• Damages by unforeseen phenomenon which
cannot be predicted with the technologies
available at the time of delivery.
• Damages by natural and anthropogenic
disasters, such as earthquake, flood, fire
and war, which are beyond our reasonable
control.
■ Export control
[Customers within Japan]
This product is subject to the Foreign Exchange
and Foreign Trade Act enacted by the Japanese
government. When exporting the product from Japan or
taking the product out of Japan, export permission
from the Japanese government is required. (as of Aug
2015). Do not use the product for other purposes.
When disposing surplus stock or inventory, prevent
unauthorized reuse and do not sell the products to the
third party.
[Customers outside Japan]
This product is subject to the laws concerning security
export control (the Foreign Exchange and Foreign Trade
Act) enacted by the Japanese government. We obtain
export permission by the Japanese government in order
to resale/provide the products. Do not use the product
for other purposes. If exporting the product from your
country, laws or regulations of the country may restrict
the export. When disposing surplus stock or inventory,
prevent unauthorized reuse and do not sell the products
to the third party.
00
Aug. 2015
Advertisement
