Humminbird HELIX Series Operation Manual page 136

Set up Humminbird CoastMaster
When a Humminbird CoastMaster chart card is installed and selected as the map source, additional menus are added to the menu
system.
Compatibility: Humminbird CoastMaster chart cards are available to use with HELIX G3, G3N and G4N control heads with
chartplotting capabilities. Visit humminbird.com to review the latest compatibility information.
NOTE: A Humminbird CoastMaster chart card must be installed and selected as the map source to enable this feature (see Change
the Map Source).
Automatic Display: The map displayed on the Chart View is based on your latitude/longitude position and the chart card installed
in the control head, so your current position will be displayed automatically. GPS reception is required for the correct position to
be displayed.
If your current position is not displayed, confirm you have GPS reception and that your CoastMaster Chart Card is installed. Also,
review the Map Source:
Select a Chart Preset
Use Chart Presets to quickly alternate between settings. You can use the default Fishing or Navigation settings provided, or you
can create a custom User preset with your preferences. The Fishing and Navigation presets are also fully customizable. You can
restore each preset back to its default settings at any time.
1. Main Menu: Press the MENU key twice. Select the HB Chart tab.
2. Select Chart Preset.
3. Press the RIGHT or LEFT Cursor keys to select your Chart Preset.
NOTE: For additional CoastMaster chart card menus, see Display Humminbird CoastMaster Contour Lines and Depth Ranges in
this manual. For additional features related to your CoastMaster chart card, visit our Web site at humminbird.com to download the
CoastMaster User Manual.
Chart Overview
Select a Chart Preset
136