Manage Your Control Head - Humminbird HELIX Series Operation Manual

Manage your Control Head

Check System Status
Use the System Status View to review control head information such as the software version and serial number.
1. Press and hold the VIEW key.
2. Select System. Press the RIGHT Cursor key.
3. Select System Status. Press the RIGHT Cursor key.
Select an Installed GPS Receiver
The GPS Receiver Override menu is available when more than one GPS receiver is installed and detected by the control head. If GPS
Receiver Override is set to Auto, the control head will select a GPS receiver automatically. To manually select a GPS receiver, follow
the instructions in this section.
NOTE: If the control head is connected to an Ethernet network, this menu is not available. In this situation, use the Network
Source Setup dialog box to select a GPS source. For more information, download the Ethernet manual from our Web site at
humminbird.com.
1. Main Menu (Custom User Mode): Press the MENU key twice. Select the Nav tab.
2. Select GPS Receiver Override.
3. Select a GPS installation location.
Manage your Control Head
System Status View (HELIX 10 CHIRP MEGA SI+ GPS G4N)
226