Humminbird HELIX Series Operation Manual page 165

Navigate to a Saved Position
If you press the GOTO key, you can choose to start navigation from a list of saved waypoints and routes.
1. Press the GOTO key.
2. Select Nav Data. Press the RIGHT Cursor key.
3. Use the Cursor Control key to select a saved waypoint or route.
4. Press the RIGHT Cursor key to start navigation.
Navigate Continuously Around a Waypoint
Continuous Navigation Mode allows you to continue to navigate and fish around a selected waypoint, even if you pass over it multiple
times.
1. Main Menu: Press the MENU key twice. Select the Nav tab.
2. Select Continuous Navigation Mode.
3. Select On.
4. Press the EXIT key repeatedly until the menu system is closed.
5. Use the Cursor Control key to move the cursor to a waypoint.
6. Press the GOTO key twice.
165
Waypoints