Humminbird HELIX Series Operation Manual page 210

Show/Hide Depth Colors
Use the following instructions to show or hide the depth colors. If you hide the depth colors, the contours will be shown on the
display.
1. From the AutoChart Options menu, select Depth Colors.
2. LakeMaster Users: Select a On (visible) or Off (hidden).
CoastMaster Users: Press the CHECK/INFO key or the RIGHT Cursor key. (check mark = visible, blank = hidden)
Change the Color Palette
The Color Palette menu changes the colors used to display the AutoChart Live map. The color range is shown in the AutoChart Color
Bar and is affected by the Min Range and Max Range settings. See Adjust the Depth Range for more information.
1. From the AutoChart Options menu, select Color Palette.
2. Select a palette.
Change the Highlight Color
If you've set a Depth Highlight in the HB Chart tab, and it is not easy to see with the AutoChart Live color palette you've selected ,
you can change the Highlight Color. See Display Humminbird LakeMaster Contour Lines and Depth Ranges or Display Humminbird
CoastMaster Contour Lines and Depth Ranges for more information.
1. From the AutoChart Options menu, select Highlight Color.
2. Select a color.
Change the Shallow Color
If you've set the Shallow Water Highlight in the HB Chart tab, and it is not easy to see with the AutoChart Live color palette you've
selected, you can change the Shallow Color. See Display Humminbird LakeMaster Contour Lines and Depth Ranges Display or
Humminbird CoastMaster Contour Lines and Depth Ranges for more information.
1. From the AutoChart Options menu, select Shallow Color.
2. Select a color.
AutoChart Live
210