Humminbird HELIX Series Operation Manual page 162

6. Save: Select Save. Press the RIGHT Cursor key.
7. Close: Press the EXIT key.
Change the Waypoint Position in the Chart View
1. Use the Cursor Control key to move the cursor to a waypoint on the Chart View.
2. Press the MENU key.
3. Select the waypoint name from the X-Press Menu. Press the RIGHT Cursor key.
4. Select Edit. Press the RIGHT Cursor key.
5. Select the latitude position. Press the RIGHT Cursor key.
6. Use the Cursor Control key to enter a new position.
7. Save: Press the CHECK/INFO key.
8. Repeat steps 5 through 7 to change the longitude position.
9. Close: Press the EXIT key.
10. Save: Select Save. Press the RIGHT Cursor key.
Show/Hide a Waypoint Target
Use the instructions in this section to display a target around a selected waypoint.
Display a Target
1. Use the Cursor Control key to move the cursor to a waypoint on the Chart View.
2. Press the MENU key.
3. Select the waypoint name from the X-Press Menu. Press the RIGHT Cursor key.
4. Select Target. Press the RIGHT Cursor key.
Waypoints
Changing the Waypoint Name
Move from Space to Space Select a Letter, Number, or Symbol
162
Save