Humminbird HELIX Series Operation Manual page 202

Display the Current Track
It is helpful to display the current track so you can see where the boat has already traveled while you're recording the map.
1. Main Menu: Press the MENU key twice. Select the Nav tab.
2. Select Current Track. Press the RIGHT Cursor key.
3. Select Appearance. Press the RIGHT Cursor key.
4. Select Visibility. Press the RIGHT or LEFT Cursor key to select Visible.
5. Save: Select Save. Press the RIGHT Cursor key.
Start a Sonar Recording for AutoChart PC
If you are planning to use AutoChart PC, start a sonar recording before you start recording your custom map.
1. Install a microSD or SD card into the control head card slot.
See HELIX Control Head for compatibility details.
2. Press and hold the VIEW key.
3. Select System > Snapshot and Recording View.
4. Press the MENU key.
5. Select Start Recording. Press the RIGHT Cursor key.
File Name: A waypoint will also be created at the boat location, and the recording shares the same file name as the waypoint
(.SON).
Use Different Views: To use different views on the control head and continue recording, press the EXIT key.
Not Available: Taking screen snapshots and playback mode are not available during recording.
NOTE: For more information, see Manage Screen Snapshots and Recordings. Also, visit our Web site at humminbird.com to
purchase AutoChart PC and download the manual.
AutoChart Live
(optional)
(optional)
202