5 PASSWORD FUNCTION
Starting Clone
Mode Operation
Selector
1st digit entry
[C>] key
1st digit is confirmed.
Selector
2nd digit entry
[C>] key
2nd digit is confirmed.
The last digit is confirmed.
[S] or [*] key
When the correct password is entered.
Figure 5-2 Clone Operation Using the Read Authorization
Password
26
Index
Contents
5.3
This function prevents configuration data or operating
frequencies from being overwritten by unauthorized
persons.
When data is written by using KPG-101D to the
transceiver configured with an Overwrite Password, the
Overwrite Password must be entered on a PC.
The Overwrite Password can be configured by using
KPG-101D. The Overwrite Password can be configured
using any numbers between 0 and 999999.
Note: The user cannot clone data to the transceiver with the
Configuration using KPG-101D
•
An incorrect
password is
entered.
Confidential
Overwrite Password
Overwrite Password.
Configuring the Overwrite Password (Refer to
FPRG 6.7.1 Common Page 1 Tab - Overwrite
Password.)
FUNC (K)/Ver. 1.01