Kenwood TK-2170 Series Function Reference page 73

17.3 Direct OST
Direct OST can be used to select OST by using the
keypad.
Direct OST can be configured to be enabled or disabled
by using KPG-101D.
Transceiver Operation
Selecting OST List 1 to 9
1. Press and hold one of the [1] to [9] keys for
more than 1 second.
The OST Name appears on the display for 2
seconds.
Selecting OST List 1 to 40
1. Press and hold the [*] key for 1 second.
The transceiver enters List Number Enter
Mode.
2. Enter the OST List number.
The OST Name appears for 2 seconds if a
configured OST number is entered.
The channel name or number appears on the
display after the OST Name disappears.
FUNC (K)/Ver. 1.01
Selecting Tone Off
1. Press and hold the [0] key for more than 1
second.
"TONE OFF" appears on the display for 2
seconds.
Disabling OST
1. Press and hold the [#] key for more than 1
second.
The OST icon disappears.
Configuration using KPG-101D
• Configuring the OST (Refer to FPRG 6.8.2
General Tab - Keypad Operation.)
17.4 OST Table
OST Table can be used to configure a QT/DQT Decode/
Encode pair for OST. A maximum of 40 pairs can be
configured. The following functions can be configured for
the OST Table.
Table 17-1 OST Table Configuration
OST Table
OST Name
QT/DQT Decode
QT/DQT Encode
Configuration using KPG-101D
• Configuring the OST Name (Refer to FPRG 6.7.3
Conventional Tab - OST Name.)
• Configuring the QT/DQT Decode (Refer to FPRG
6.7.3 Conventional Tab - QT/DQT Decode.)
• Configuring the QT/DQT Encode (Refer to FPRG
6.7.3 Conventional Tab - QT/DQT Encode.)
Confidential
17 OST
Configuration
OST Name can be used to assign a
name to an OST QT/DQT Encode/
Decode pair. A maximum of 8
characters can be entered.
"TONE 1" to "TONE 40" appears on
the display if no OST Name is
configured.
The QT/DQT Decode code used for
receiving a call can be configured.
The following QT/DQT Decode
range is available.
QT: 67 to 254.1 Hz/ 0.1 Hz steps
DQT: 000N to 777N, 000I to 777I
The QT/DQT used to make a call
can be configured. The following
QT/DQT Encode range is available.
QT: 67 to 254.1 Hz/ 0.1 Hz steps
DQT: 000N to 777N, 000I to 777I
Contents Index
61