Kenwood TK-2170 Series Function Reference page 123

Note:
The transceiver does not execute Scan Delete/Add even if
the Scan Del/Add key is pressed during the scan.
The transceiver can execute Scan Delete/Add only when the
transceiver pauses scanning while List is configured for
Scan Type.
A zone cannot be added to or deleted from the Scan List if
Single is configured for Scan Type.
Configuration using KPG-101D
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
21.6.2 Scan List (TK-3173 only)
Scan List can be used to execute the List Scan for each
zone.
Scan List Table can be configured if Scan List is enabled.
Scan List can be configured to be enabled or disabled by
using KPG-101D.
Note: Scan List is available if List Scan is configured for Scan
Type.
Configuration using KPG-101D
• Configuring the Scan List (Refer to FPRG 6.2.11
Scan List.)
21.6.3 Scan List Table (TK-3173 only)
Scan List Table can be used to select the target zone for
List Scan. The Zone checkbox of the target zone must
be checked to execute the List Scan.
Configuration using KPG-101D
• Configuring the Scan List Table (Refer to FPRG
6.2.14 Scan List Table Window.)
FUNC (K)/Ver. 1.01
21.6.4 Priority/ Priority Zone-channel
Priority Zone-channel can be used to configure the Zone-
channel having high priority. The following functions can
be configured for Priority.
Table 21-6 Priority Operation
Priority
None Does not configure the Priority Channel.
The channel configured for the Priority Zone-
Fixed channel configured
as Priority Channel.
The Selected channel is configured for Priority
Selected Channel. Priority cannot be configured
KPG-101D.
The channel selected by a user is configured as a
Operator Priority Channel. The transceiver enters Priority-
Selectable channel Configuration Mode when the Scan key is
pressed and held for 2 seconds.
Note: Priority Zone-channel cannot be configured if "Selected" is
selected from the Priority dropdown list.
Transceiver Operation
Configuring the Priority Channel
1. Select the channel to be configured as Priority
Channel.
2. Press and hold the Scan key for 2 seconds.
The transceiver enters Priority-channel
Configuration Mode and the "
3. Press the [S] key.
The selected channel is configured as Priority
Channel and the channel name or number
appears on the display.
The "
Confidential
Operation
by
using KPG-101D is used
" icon blinks.
" icon stops blinking.
Contents Index
21 SCAN
by
using
111