Read Authorization Password - Kenwood TK-2170 Series Function Reference

5.2 Read Authorization
Password
This function prevents configuration data or operating
frequencies from being read by unauthorized persons.
When data is read by using KPG-101D from the
transceiver configured with a Read Authorization
Password, the Read Authorization Password must be
entered on a PC. If the password does not match, the
data configured on the transceiver cannot be read.
When a Read Authorization Password is configured for the
source transceiver, Cloning cannot be started unless the
entered password matches.
The Read Authorization Password can be configured by
using KPG-101D. The Read Authorization Password can
be configured using any numbers between 0 and 999999.
The Read Authorization Password can be configured by
using the keypad or Selector.
Transceiver Operation
Using the keypad
1. Press the numeric keys on the keypad to enter
the password.
2. Press the [S] or [*] key when the entire password
is entered.
Using the Selector
1. Select a character using the Selector.
The selected characters blink.
2. Press the [C>] key to confirm the character.
The entered character stops blinking and is
confirmed on the display.
3. Repeat steps 1 and 2 to enter the entire
password.
4. Press the [S] or [*] key after the entire password
is entered.
Note: The following keys can be used for entering a Read
Authorization Password.
FUNC (K)/Ver. 1.01
Key
Selector
Side 1
[S]
[A]
[<B]
[C>]
Side 2
[0] to [9]
[*]
[#]
PTT switch
Configuration using KPG-101D
• Configuring the Read Authorization Password
(Refer to FPRG 6.7.1 Common Page 1 Tab - Read
Authorization Password.)
• Configuring the Clone (Refer to FPRG 6.7.2
Common Page 2 Tab - Clone.)
Confidential
5 PASSWORD FUNCTION
Table 5-2 Key Operation
Operation
Increases or decreases the displayed
number (0 to 9).
Exits from the current mode.
Password Confirmation
Press: Deletes a number.
Hold: Deletes all numbers.
-
Confirms the selected number.
-
Enters the number.
Password Confirmation
Press: Deletes a number.
Hold: Deletes all numbers.
-
Contents
25
Index