Kenwood TK-2170 Series Function Reference page 133

24 EXTENDED FUNCTION
The transceiver has programmable Function Ports
located in the Optional Board Area.
24.1 Squelch Logic Signal
Squelch Logic Signal can be used to send the receive
status of the transceiver to the A2 solder pad of the
optional board area.
Configuration
This port notifies the matching status of QT/
DQT in Conventional Group and of GID
reception in Trunking System.
This port activates when the QT/DQT
matches on a channel on which the
QT/DQT Decode is configured while the
transceiver is in a Conventional Group. This
TOR
port also activates when the transceiver
receives a carrier on a channel on which the
QT/DQT Decode is not configured.
Otherwise, this port is deactivated.
This port activates when the transceiver
receives a call with GID in Trunking System.
Otherwise, this port is deactivated.
The transceiver notifies a user that the
transceiver is receiving a carrier.
This port activates when the transceiver
COR
receives a carrier in both Conventional
Group and Trunking System. Otherwise,
this port is deactivated.
The transceiver notifies a user that voice
communication is available in both
Conventional Group and Trunking System.
This port is activated when transmitting in
LOK
Conventional Group. Otherwise, this port is
(TK-3173 only)
deactivated.
This port activates when the transceiver
establishes a link to the repeater in Trunking
System. Otherwise, this port is deactivated.
Squelch Logic Signal can be configured by using
KPG-101D.
Note:
Squelch Logic Signal cannot be configured if "Voice Scrambler"
is selected from the Product Information window > Optional
Board dropdown list.
"LOK" cannot be selected if anything other than "ANI Board" is
selected from the Product Information window > Optional
Board dropdown list.
FUNC (K)/Ver. 1.01
Operation
Confidential
Configuration using KPG-101D
• Configuring the Squelch Logic Signal (Refer to
FPRG 6.15.1 Squelch Logic Signal.)
121
Contents Index