Kenwood TK-2170 Series Function Reference page 49

Table 12-2 Timing To Transmit PTT ID
(FleetSync Configured for PTT ID Type)
PTT ID Timing To Transmit PTT ID
Off No PTT ID is transmitted.
Transceiver sends Fleet (Own) and ID (Own)
BOT as the PTT ID when the PTT switch is
pressed.
Transceiver sends Fleet (Own) and ID (Own)
EOT as the PTT ID when the PTT switch is
released.
Transceiver sends Fleet (Own) and ID (Own)
Both as the PTT ID when the PTT switch is
pressed or released.
A user can make an individual call. The ID
from 1 to 100 in the Selcall List can be
List 1 to 100
selected. A user can make a Selcall using
the Fleet and ID.
Table 12-3 Timing To Transmit PTT ID
(ANI Board Configured for PTT ID Type)
PTT ID Timing To Transmit PTT ID
Off No PTT ID is transmitted.
Transceiver sends the ANI code of the ANI
On Board. The timing to send the ANI code is
configured at the ANI Board side.
Note:
"List 1 to 100" and "On" do not appear on the display if "DTMF" is
selected from the PTT ID Type dropdown list.
"On" does not appear on the display if "FleetSync" is selected
from the PTT ID Type dropdown list.
"BOT", "EOT", "Both" and "List 1 to 100" do not appear if "ANI
Board" is selected using the PTT ID Type dropdown list.
The ID configured using FleetSync window > ID List tab can be
selected if List 1 to 100 is selected.
Configuration using KPG-101D
• Configuring the PTT ID (Conventional Group)
(Refer to FPRG 6.4.13 PTT ID.)
• Configuring the PTT ID (Trunking System) (Refer
to FPRG 6.6.8 PTT ID.)
FUNC (K)/Ver. 1.01
12.3 Restricted ID in
Talk Around
This function disables the PTT ID transmission in
Talk Around Mode even if the PTT switch is pressed or
released.
This function can be used when PTT ID is not required
such as when directly communicating with other
transceivers. Because the PTT ID is normally used for
communicating to the base station.
Restricted ID in Talk Around can be configured to be
enabled or disabled by using KPG-101D.
Note: Restricted ID in Talk Around is only available in
Conventional Group.
Configuration using KPG-101D
• Configuring the Restricted ID in Talk Around
(Refer to FPRG 6.7.3 Conventional Tab -
Restricted ID in Talk Around.)
Confidential
12 PTT ID
Contents Index
37