Kenwood TK-2170 Series Function Reference page 60

15 LTR TRUNKING
15.1.20 Decode ID (Block ID)
Decode ID (Block ID) can be used to configure the ID
used for receiving only and restricting the transmission.
The transceiver emits the received audio if the
transceiver receives a call with the Decode ID.
Decode ID (Block ID) can be configured by using
KPG-101D.
Configuration using KPG-101D
•
Configuring the Decode ID (Block ID) (Refer to
FPRG 6.3.24 Decode (Block ID).)
15.2 Group ID
The following functions relevant to the LTR Trunked
Radio System Group ID can be configured by using KPG-
101D:
•
Encode ID/ Decode ID
•
GID Name
•
Transmit Power
•
Optional Signaling
•
PTT ID
•
Call Indicator
•
Scan Add
• Transpond
• Talk Around
• Compander
•
Data
• Voice Scrambler
•
Scrambler Code
48
Index Contents
15.2.1 Encode ID/ Decode ID
Encode ID is the LTR ID sent when the transceiver
transmits.
Decode ID is the LTR ID used to open squelch and then
allow a user to communicate.
The transceiver communicates within a Group using the
same LTR ID.
Encode ID/ Decode ID can be configured by using KPG-
101D.
Configuration using KPG-101D
•
Configuring the Encode ID (Refer to FPRG 6.6.3
Encode ID.)
•
Configuring the Decode ID (Refer to FPRG 6.6.4
Decode ID.)
15.2.2 GID Name
GID Name is a name assigned to a Group ID.
(Refer to 3.4.4 GID Name on page 16.)
GID Name can be configured by using KPG-101D.
Configuration using KPG-101D
•
Configuring the GID Name (Refer to FPRG 6.6.5
GID Name.)
15.2.3 Transmit Power
Transmit Power is the transmission power of the
transceiver. (Refer to 1.4 Transmit Power on page 3.)
Transmit Power can be switched between High and Low
by pressing the Low Transmit Power key.
Transmit Power can be configured by using KPG-101D.
Configuration using KPG-101D
•
Configuring the Transmit Power (Refer to FPRG
6.6.6 Transmit Power.)
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
Confidential FUNC (K)/Ver. 1.01