Kenwood TK-2170 Series Function Reference page 78

18 DTMF
Configuration using KPG-101D
• Configuring the List Selection Key (Selector)
(Refer to FPRG 6.8.2 General Tab - List Selection
Key (Selector).)
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
• Assigning functions to the Keypad Operation
(Refer to FPRG 6.8.2 General Tab - Keypad
Operation.)
• Configuring the Store & Send (Refer to FPRG
6.10.1 Encode Tab - Store & Send.)
18.1.5 Redial
This function allows the transceiver to send the previously
sent DTMF code again.
Transceiver Operation
1. Press the Autodial key while the transceiver is in
standby mode.
The Autodial List appears on the display.
2. Press the [*] and [0] keys.
The last sent DTMF code appears on the display.
Press the [S] or [*] key to cancel sending the code.
3. Press the PTT switch to send the DTMF code and
voice.
Press the Side 2 key to send the DTMF code only.
66
Index Contents
18.1.6 Beginning of Transmit (BOT)
Beginning of Transmit can be used to send the DTMF
code configured for Beginning of Transmit.
Transceiver Operation
1. Press the Autodial key while the transceiver is in
standby mode.
The Autodial List appears on the display.
2. Press the [*] key twice.
The DTMF code configured for Beginning of
Transmit appears on the display.
Press the [S] key to cancel sending the code.
3. Press the PTT switch to send the DTMF code and
voice.
Press the Side 2 key to send the DTMF code only.
Confidential FUNC (K)/Ver. 1.01