Kenwood TK-2170 Series Function Reference page 63

15.3.3 Repeater Information Table
In LTR Trunked Radio System, the transceiver
communicates via a repeater.
Information for a maximum of 20 repeaters can be
configured in the Repeater Information Table for each
zone.
The following functions relevant to Repeater Table
Information can be configured by using KPG-101D.
Table 15-2 Repeater Information Table Configuration
Repeater
Configuration
Receive Frequency Receive Frequency can be configured.
Transmit Frequency can be
Transmit Frequency
configured.
Beat Shift can be configured.
Beat Shift
1.8 Beat Shift on page 5.)
A repeater can be configured to be
Telephone used as the RIC (Repeater
Interconnect).
Configuration using KPG-101D
•
Configuring the Receive Frequency (Refer to
FPRG 6.5.3 Receive Frequency.)
•
Configuring the Transmit Frequency (Refer to
FPRG 6.5.4 Transmit Frequency.)
•
Configuring the Beat Shift (Refer to FPRG 6.5.5
Beat Shift.)
• Configuring the Telephone (Refer to FPRG 6.5.6
Telephone.)
FUNC (K)/Ver. 1.01
Operation
(Refer to
Confidential
15.4 Telephone Interconnect
In LTR Trunked Radio System, the transceiver connects
to the PSTN (Public Switched Telephone Network) via
the RIC (Repeater Interconnect).
15.4.1 Connecting to the Phone Line
The transceiver can connect to a phone line with Autodial.
Transceiver Operation
Connecting to the Phone Line with Auto
Telephone
1. Select the phone number to call with Autodial.
(Refer to 18 DTMF on page 63.)
2. Press the Side 2 key.
The transceiver is automatically connected to
the phone line and makes a call to the selected
telephone number.
Connecting to the Phone Line with PTT
1. Select the GID with the Telephone ID.
In this case, the "
2. Select the phone number to call with Autodial.
(Refer to 18 DTMF on page 63.)
3. Press the PTT switch.
The transceiver is automatically connected to
the phone line and makes a call to the selected
telephone number.
Disconnecting from the Phone Line
1. Press the Telephone Disconnect key.
The transceiver terminates the communication.
Configuration using KPG-101D
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
15 LTR TRUNKING
" icon appears.
Contents Index
51