Kenwood TK-2170 Series Function Reference page 96

20 FLEETSYNC
20.2.2 Making a Selcall
The transceiver waits to receive a call under the following
conditions when the transceiver receives a Selcall.
The conditions for the FleetSync ID to match when
receiving a Selcall are as follows.
Table 20-4 Call Type Conditions for Unmuting
Call Type
fff: 100 to 399
Individual Call Match
Group Call Match
Fleet Call Match
Supervisor Call ALL Fleet
Broadcast Call ALL Fleet
Note: "FleetSync" must be selected from the Channel Edit
window > Optional Signaling dropdown list.
Individual Call/ Group Call
A user can respond to the party appearing on the
display by pressing the PTT switch or Side 2 key.
The transceiver only controls the mute function and
does not enter Call Mode in the following conditions:
• If the transceiver receives a call from the party
having Fleet inhibited by the Interfleet
configuration.
• When the transmitting party's ID is outside of the
Unit ID Encode Block range.
• When the ID has "Yes" configured for Transmit
Inhibit in the Selcall List.
The display returns to the previous display when a key
is pressed. The display also returns to the previous
display after the Auto Reset Timer expires if LCD
(Auto Reset) is enabled.
Display when an ID is registered in the ID List
(Individual Call)
Display when no ID is registered in the ID List
(Individual Call)
84
Index Contents
Conditions to Unmute
Fleet ID
iiii: 1000 to 4999
Match
Group ID matches
ALL ID
Match
ALL ID
Display when an ID is registered in the ID List
(Group Call)
Display when no ID is registered in the ID List
(Group Call)
Fleet Call
A user can make a call to the party appearing on the
display by pressing the PTT switch or Side 2 key.
The transceiver only controls the mute function and
does not enter Call Mode when receiving a call from a
party having a Fleet that is not registered in the ID
List.
The display returns to the previous display when a key
is pressed. The display also returns to the previous
display after the Auto Reset Timer expires if LCD
(Auto Reset) is enabled.
Display when an ID is registered in the ID List
Display when an ID is not registered in the ID
List
Supervisor Call/ Broadcast Call
A user can make a call to the party appearing on the
display by pressing the PTT switch or Side 2 key if an
ID is registered in the ID List.
The transceiver only controls the mute function and
does not enter Call Mode when receiving a call from
the party having an ID that is not registered in the ID
List.
The display returns to the previous display when a key
is pressed. The display also returns to the previous
display after the Auto Reset Timer expires if LCD
(Auto Reset) is enabled.
Confidential FUNC (K)/Ver. 1.01