Kenwood TK-2170 Series Function Reference page 79

18.1.7 End of Transmit (EOT)
End of Transmit can be used to send the DTMF code
configured for End of Transmit.
Transceiver Operation
1. Press the Autodial key while the transceiver is in
standby mode.
The Autodial List appears on the display.
2. Press the [*] and [#] keys.
The DTMF code configured for End of Transmit
appears on the display.
Press the [S] or [*] key to cancel sending the code.
3. Press the PTT switch to send the DTMF code and
voice.
Press the Side 2 key to send the DTMF code only.
FUNC (K)/Ver. 1.01
18.2 Encode
The following functions relevant to DTMF Encode can be
configured by using KPG-101D:
• DTMF Speed
• First Digit Delay Time
• First Digit Delay Time with QT
• First Digit Time
• * and # Digit Time
• DTMF Hold Time
• D Code Assignment
• Manual Dialing
• Store & Send
• Dial ID
• Auto Telephone
DTMF Sidetone
•
18.2.1 DTMF Speed
DTMF Speed can be used to configure the DTMF
automatic transmission speed when the transceiver
automatically sends PTT ID, Autodial, Store & Send,
BOT, or EOT.
The transmission speed for DTMF can be configured in
digits/second.
DTMF Speed can be configured by using KPG-101D.
The following items can be configured when selecting the
DTMF automatic transmission speed.
Table 18-3 DTMF Automatic Transmission Speed
Option
6-digit/s
8-digit/s
10-digit/s
15-digit/s
Configuration using KPG-101D
• Configuring the DTMF Speed (Refer to FPRG
6.10.1 Encode Tab - DTMF Speed.)
Confidential
Digit Time
Gap Time
(Transmission
(Silent Period)
Period)
83.3 ms 83.3 ms
62.5 ms 62.5 ms
50.0 ms 50.0 ms
33.3 ms 33.3 ms
Contents Index
18 DTMF
67