Kenwood TK-2170 Series Function Reference page 131

Configuration using KPG-101D
• Configuring the Man-down Logic Type (Refer to
FPRG 6.14.21 Man-down Logic Type (Man-
down).)
22.1.22 Emergency ID
The type of control and the code to be sent each time the
transceiver starts an automatic transmission or reception
in Emergency Mode can be configured.
Emergency ID can be configured by KPG-101D. The
following Emergency IDs are available.
Table 22-6 Emergency ID Operation
Emergency ID
The transceiver transmits and receives
None according to the configuration
programmed by using KPG-101D.
The transceiver transmits and receives
according to the configuration
programmed by using KPG-101D. The
DTMF transceiver first sends the DTMF code
selected from the Emergency DTMF ID
when sending a message in Emergency
Mode.
The transceiver transmits and receives
according to the configuration
programmed by using KPG-101D. The
FleetSync transceiver first sends the FleetSync
Selcall ID selected from the Emergency
Call Fleet and Emergency Call ID when
sending a message in Emergency Mode.
The transceiver transmits and receives
ANI Board in conjunction with the ANI Board
control.
Note: ANI Board can be configured only when "ANI Board" is
selected from the Product Information window > Optional
Board dropdown list.
Configuration using KPG-101D
• Configuring the Emergency ID (Refer to FPRG
6.14.22 Emergency ID.)
22.1.23 Emergency DTMF ID
The DTMF code sent first in Emergency Mode can be
configured if "DTMF" is selected from the Emergency ID
dropdown list.
Emergency DTMF ID can be configured by using KPG-
101D.
Configuration using KPG-101D
• Configuring the Emergency DTMF ID (Refer to
FPRG 6.14.23 Emergency DTMF ID.)
FUNC (K)/Ver. 1.01
Operation
Confidential
22.1.24 Emergency Call Fleet
The Call Fleet sent first in Emergency Mode can be
configured if "FleetSync" is selected from the Emergency
ID dropdown list.
Emergency Call Fleet can be configured by using KPG-
101D.
Configuration using KPG-101D
• Configuring the Emergency Call Fleet (Refer to
FPRG 6.14.24 Emergency Call Fleet.)
22.1.25 Emergency Call ID
The Call ID sent first in Emergency Mode can be
configured if "FleetSync" is selected from the Emergency
ID dropdown list.
Emergency Call ID can be configured by using KPG-
101D.
Configuration using KPG-101D
• Configuring the Emergency Call ID (Refer to
FPRG 6.14.25 Emergency Call ID.)
22 EMERGENCY MODE
Contents Index
119