Kenwood TK-2170 Series Function Reference page 105

4. The display returns to the previous display.
The " " stops blinking when the received Short
Message is read.
95.)
Note: To use serial communications, a user must prepare
FleetSync compatible software or external devices.
20.4.3 Short Message Stack
Short Message Stack can be used to store received Short
Messages in Stack Memory. One short message can be
stored in the Short Message Stack.
When a message is stacked, the "
case, a user can read the stored Short Message when
the transceiver enters Stack Mode.
on page 95.)
The transceiver can be configured to store Short
Messages by using KPG-101D.
Note: The transceiver can store a maximum of 5 Status Messages
and 1 Short Message.
Configuration using KPG-101D
• Configuring the Short Message Stack (Refer to
FPRG 6.12.2 General 2 Tab - Short Message
Stack.)
FUNC (K)/Ver. 1.01
(Refer to 20.6 Stack on page
" icon blinks. In this
(Refer to 20.6 Stack
20.4.4 Short Message on Data Zone-
CH/GID
This function allows the transceiver to automatically
change the channel to the Data Zone-CH/GID to send a
Short Message.
The transceiver returns to the previous Zone-CH/GID
when the transceiver finishes sending the Short
Message. This function can be used to send data using a
specific channel.
Short Message on Data Zone-CH/GID can be configured
to be enabled or disabled by using KPG-101D.
Configuration using KPG-101D
• Configuring the Short Message on Data Zone-CH/
GID (Refer to FPRG 6.12.3 Parameter Tab - Short
Message on Data Zone-CH/GID.)
20.4.5 Short Message Serial Output
Short Message Serial Output can be used to send a Short
Message and the caller's Fleet and ID from the
transceiver's COM port when the transceiver receives a
Short Message.
The dispatcher can remote control the transceivers with
the PC. With this function, a user can check the caller
status by connecting an external device to the
transceiver.
Short Message Serial Output can be configured to be
enabled or disabled by using KPG-101D.
Configuration using KPG-101D
• Configuring the Short Message Serial Output
(Refer to FPRG 6.12.2 General 2 Tab - Short
Message Serial Output.)
Confidential
20 FLEETSYNC
Contents Index
93