Kenwood TK-2170 Series Function Reference page 95

2. Select the list number.
• Using the PF keys
When the [<B] or [C>] key is pressed, the
list number increments or decrements.
• Using the Selector
Turn the Selector clockwise to increment
the List number.
Turn the Selector counterclockwise to
decrement the List number.
*1
If the List Selection Key (Selector) is enabled.
• Using the keypad
Press the [0] key on the keypad and enter
the List number.
Example:
Press the [1], [0] and [0] keys to make a
call to List number 100.
Press the [0], [9] and [0] keys to make a
call to List number 90.
Press the [0], [0] and [7] keys to make a
call to List number 7.
The ID List Name appears on the display
when the last digit is entered.
3. Press the PTT switch to make a Voice Call.
Press the Side 2 key to make a Paging Call.
Press the [S] or [*] key to enter a Status
Message. (Only if the transceiver enters Status
Message Entry Mode after the Selcall + Status
key is pressed.)
Function on page 86.)
Making a Selcall with Manual Dialing
1. Press the Selcall or Selcall + Status key.
The transceiver enters List Selection Mode.
FUNC (K)/Ver. 1.01
*1
(Refer to 20.3 Status Message
2. Press and hold the [S] or [*] key for 1 second.
The transceiver enters Selcall ID Entry Mode.
The last used ID appears on the display.
No ID appears on the display when the
transceiver enters Selcall ID Entry Mode for the
first time.
3. Enter the ID.
• Using the Selector or PF keys
Select a code using the Selector.
Press the [C>] key after selecting the code.
*1 If the List Selection Key (Selector) is enabled.
• Using the keypad
Enter the code using the [0] to [9] keys.
• Deleting the Entered Code
Press the [A] or [#] key.
The selected code will be deleted.
Press and hold the [A] or [#] key.
All codes will be deleted.
4. Press the PTT switch to make a Voice Call.
Press the Side 2 key to make a Paging Call.
Press the [S] or [*] key to enter a Status
Message. (Only if the transceiver enters Status
Message Entry Mode after the Selcall + Status
key is pressed.)
Function on page 86.)
Confidential
20 FLEETSYNC
*1
(Refer to 20.3 Status Message
Contents Index
83