Kenwood TK-2170 Series Function Reference page 51

14 CONVENTIONAL GROUP
Conventional Groups are groups of Simplex and Semi-
duplex Conventional Channels.
A zone can be configured for Conventional Group by
using KPG-101D.
14.1 Zone
The following functions relevant to the zone in
Conventional Group can be configured by using
KPG-101D:
• Zone Name
• Data Zone-channel
• Home Channel
• Operator Selectable Home-channel
• Optional Signaling Decode Condition
• Audio Control
• Time-out Timer (TOT)
• TOT Pre-alert
• TOT Rekey Time
• TOT Reset Time
• Zone Add
• Scan List
14.1.1 Zone Name
Zone Name can be used to assign a name to a zone.
(Refer to 3.4.1 Zone Name on page 15.)
Zone Name can be configured by using KPG-101D.
Configuration using KPG-101D
• Configuring the Zone Name (Refer to FPRG 6.2.1
Zone Name.)
FUNC (K)/Ver. 1.01
14.1.2 Data Zone-channel
Data Zone-channel can be used to separate channels for
data communications from channels for voice
communications.
page 120.)
Data Zone-channel can be configured by using
KPG-101D.
Configuration using KPG-101D
• Configuring the Data Zone-channel (Refer to
FPRG 6.2.2 Data Zone-CH/GID.)
14.1.3 Home Channel
This function can be used to jump to a frequently used
channel with a press of the key.
GID on page 10.)
The Home Channel can be configured by using
KPG-101D.
Note: With this function, the transceiver can only jump to a
channel in the same zone.
Configuration using KPG-101D
• Configuring the Home Channel (Refer to FPRG
6.2.3 Home Channel.)
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
14.1.4 Operator Selectable
Home-channel
Operator Selectable Home-channel can be used to
configure the Home Channel via transceiver operation.
A user can change the Home Channel by selecting the
channel to be configured as the Home Channel and
pressing and holding the Home CH/GID key for than 3
seconds while this function is enabled.
When the Home CH/GID key is pressed and held for
more than 3 seconds while Operator Selectable Home-
channel is enabled, the Home Channel can be changed.
Operator Selectable Home-channel can be configured to
be enabled or disabled by using KPG-101D.
Configuration using KPG-101D
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
• Configuring the Operator Selectable Home-
channel (Refer to FPRG 6.2.4 Operator
Selectable Home-channel.)
Confidential
(Refer to 23.1.2 Data Zone-CH/GID on
(Refer to 2.7 Home CH/
Contents Index
39