Kenwood TK-2170 Series Function Reference page 122

21 SCAN
Transceiver Operation
Priority Channel
The " " icon appears in the following way.
21.5 Group Scan
(TK-3173 only)
Group Scan can be used to automatically scan all Group
IDs in the current Trunking System. A user does not
need to press the Scan key to execute the Group Scan.
The following Group IDs can be scanned:
• A Group ID that Scan Add is selected by using KPG-
101D
• A Group ID added to the Scan List with the Scan
Delete/Add key
The transceiver can execute Group Scan even if the
transceiver is executing Single Scan, Multi Scan or List
Scan by pressing the Scan key.
Scan operation differs between when the transceiver
automatically executes Group Scan and when the
transceiver executes Group Scan in Scan Mode.
• The transceiver does not scan Priority Channel while
the transceiver is automatically executing Group
Scan.
• The transceiver scans Priority Channel while the
transceiver is executing Group Scan in Scan Mode.
110
Index Contents
21.6 Configuring the Scan
The following scan functions can be configured by using
KPG-101D:
• Scan Delete/Add
• Scan List
• Scan List Table
• Priority/ Priority Zone-channel
• Revert CH/GID
• Dropout Delay Time
• Dwell Time
• Lookback
• Scan Type
• Revert CH/GID Display
• Priority-channel Stop Tone
• Power-on Scan
21.6.1 Scan Delete/Add
Scan Delete/Add can be used to add a CH/GID to the
Scan List or remove a CH/GID from the Scan List.
With this function, the transceiver can reliably receive
calls from important CH/GIDs by deleting unnecessary
CH/GIDs to improve the scan speed.
Transceiver Operation
Adding a CH/GID to the Scan List or Deleting a
CH/GID from the Scan List
• Press the Scan Delete/Add key.
If the current CH/GID is registered in the Scan
List, the CH/GID is deleted from the Scan List.
The "
If the current CH/GID is not registered in the
Scan List, the CH/GID is added to the Scan
List. The "
Adding a Zone to the Scan List or Deleting a
Zone from the Scan List
• Press and hold the Scan Delete/Add key for 1
second.
If the current zone is registered in the Scan
List, the zone is deleted from the Scan List.
The "
If the current zone is not registered in the Scan
List, the zone is deleted from the Scan List. The
" " icon (left) appears.
Confidential
" icon (right) disappears.
" icon (right) appears.
" icon (left) disappears.
FUNC (K)/Ver. 1.01