Kenwood TK-2170 Series Function Reference page 97

Display when an ID is registered in the ID List
(Supervisor Call)
Display when no ID is registered in the ID List
(Supervisor Call)
Display when an ID is registered in the ID List
(Broadcast Call)
Display when no ID is registered in the ID List
(Broadcast Call)
Note: When the transceiver receives a Group Call, Fleet Call, or
Broadcast Call, the Fleet and ID of the received Selcall
appear on the display instead of the Fleet and ID of the
caller. Since the call information is more important than the
caller's information.
FUNC (K)/Ver. 1.01
20.2.3 ID List
The transceiver uses an individual FleetSync ID for
communications if FleetSync is enabled. The receiving
party's FleetSync IDs must be pre-programmed in the
transceiver by using KPG-101D. The transceiver can
store a maximum of 100 FleetSync IDs.
The following functions can be configured in the ID List by
using KPG-101D.
Table 20-5 ID List Configuration
ID List
Configures the Fleet of the FleetSync ID. Select ALL
Fleet or a value between 100 and 349.
A user can call all transceivers in the same Fleet.
Configures the ID of the FleetSync ID. Select ALL
or a value between 1000 and 4999.
ID
A user can call all transceivers having the same
ID.
Configures the caller's ID name. A maximum of 8
characters can be configured for the ID Name.
If the transceiver receives an Individual Call and
the received Fleet and ID are configured in the ID
ID Name List, the ID Name of the caller appears.
The Call ID Name appears on the display when
the transceiver receives a Selcall other than
Individual Call and the received ID is configured in
the ID List.
Enables or disables the transmit capability.
When the transceiver receives a call from the ID
configured for Transmit Inhibit, the ID does not
appear on the ID Selection window and a user
Transmit
cannot select the ID.
Inhibit
The caller's ID Name appears if the transceiver
receives a call from the ID configured for Transmit
Inhibit. In this case, a user cannot respond even if
the PTT switch is pressed.
Configuration using KPG-101D
• Configuring the ID List (Refer to FPRG 6.12.4 ID
List Tab.)
Confidential
20 FLEETSYNC
Operation
Contents Index
85