Figure 40-7 Ip Routing Policy Example - ZyXEL Communications Prestige 662HW Series User Manual

Create a rule for this set in Menu 25.1.1 — IP Routing Policy as shown next.
2.
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol
Type of Service= Don't Care
Precedence
Source:
addr start= 192.168.1.2
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
Gateway addr
Type of Service= No Change
Precedence
Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
3.
Create another policy set in menu 25.
4.
Create a rule in menu 25.1 for this set to route packets from any host (IP=0.0.0.0 means any host)
5.
with protocol TCP and port FTP access through another gateway (192.168.1.100).
IP Policy Routing
Menu 25.1.1 - IP Routing Policy
= 6
= Don't Care
= 192.168.1.1
= No Change
Press ENTER to Confirm or ESC to Cancel:

Figure 40-7 IP Routing Policy Example

Prestige 662HW Series User's Guide
Packet length= 10
Len Comp= N/A
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Log= No
40-7