How Often Does The Prestige Update The Time; Figure 11-6 System Maintenance - Time And Date Setting - ZyXEL Communications Prestige 316 User Manual

How Often Does the Prestige Update the Time?

11.3.1
The Prestige updates the time in three instances:
i. On leaving Menu 24.10 after making changes.
ii. When the Prestige boots up and there is a time server configured in Menu 24.10.
iii. The time is also updated at 24-hour intervals after booting.
Press Space Bar to Toggle.
Figure 11-6
FIELD
Use Time Server when
Bootup
System Maintenance and Information
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT+0800
Press ENTER to Confirm or ESC to Cancel:
System Maintenance – Time and Date Setting
Table 11-3
Enter the time service protocol that your time server will send when the
Prestige powers up. Choices are Daytime (RFC-867), Time (RFC-868), NTP
(RFC-1305) and None. The main differences between them are the format,
e.g., the Daytime (RFC-867) format is day/month/date/year/time zone of the
server while the Time (RFC-868) format gives a 4-byte integer giving the
total number of seconds since 1970/1/1 at 0:0:0. The NTP (RFC-1305)
format is similar. Not all time servers support all protocols, so you may have
to check with your ISP/network administrator or use trial and error to find a
protocol that works. If you select None (this is the default value), you can
enter the time manually but each time the system is booted, the time and
date will be reset to
Prestige 316 Broadband Sharing Gateway / Wireless LAN
Time and Date Setting Fields
DESCRIPTION
2000/1/1
0:0:0.
00 : 00 : 00
00 : 04 : 42
2000 - 01 - 01
2000 - 01 - 01
11-5