The Anti-Spam Black List Screen; Table 185 Anti-X > Anti-Virus > General > Add - ZyXEL Communications ZyWALL USG 100 Series User Manual

Chapter 34 Anti-Spam
The following table describes the labels in this screen.
Table 185 Anti-X > Anti-Virus > General > Add
LABEL
Enable Policy
Log
From
To
Protocols to Scan
Check White List
Check Black List
Check DNSBL
Actions for Spam
Mail
SMTP
POP3
OK
Cancel

34.4 The Anti-Spam Black List Screen

Click Anti-X > Anti-Spam > Black /White List to display the Anti-Spam Black List screen.
Configure the black list to identify spam e-mail. You can create black list entries based on the
sender's or relay server's IP address or e-mail address. You can also create entries that check
for particular e-mail header fields with specific values or specific subject text.
574
DESCRIPTION
Select this check box to have the ZyWALL apply this anti-spam policy to check e-
mail traffic for spam.
Select how the ZyWALL is to log the event when the DNSBL times out or an e-mail
matches the white list, black list, or DNSBL.
no: Do not create a log.
log: Create a log on the ZyWALL.
log alert: An alert is an e-mailed log for more serious events that may need more
immediate attention. Select this option to have the ZyWALL send an alert.
Select source and destination zones for traffic to scan for spam. The anti-spam
policy has the ZyWALL scan traffic coming from the From zone and going to the
To zone.
Select which protocols of traffic to scan for spam.
SMTP applies to traffic using TCP port 25.
POP3 applies to traffic using TCP port 110.
Select this check box to check e-mail against the white list. The ZyWALL classifies
e-mail that matches a white list entry as legitimate (not spam).
Select this check box to check e-mail against the black list. The ZyWALL classifies
e-mail that matches a black list entry as spam.
Select this check box to check e-mail against the ZyWALL's configured DNSBL
domains. The ZyWALL classifies e-mail that matches a DNS black list as spam.
Use this section to set how the ZyWALL is to handle spam mail.
Select how the ZyWALL is to handle spam SMTP mail.
Select drop to discard spam SMTP mail.
Select forward to allow spam SMTP mail to go through.
Select forward with tag to add a spam tag to an SMTP spam mail's mail subject
and send it on to the destination.
Select how the ZyWALL is to handle spam POP3 mail.
Select forward to allow spam POP3 mail to go through.
Select forward with tag to add a spam tag to an POP3 spam mail's mail subject
and send it on to the destination.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
ZyWALL USG 100/200 Series User's Guide